This is the latest recevied telemetry packets stored in our database for station/object SA3VCC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274378 | 230 | 13.6 | 14 | 100 | 10 |
| 1766167204 | 234 | 13.6 | 14 | 100 | 10 |
| 1766166004 | 230 | 13.6 | 14 | 100 | 10 |
| 1766164804 | 234 | 13.6 | 17 | 100 | 10 |
| 1766163607 | 232 | 13.6 | 13 | 100 | 10 |
| 1766162404 | 234 | 13.6 | 14 | 100 | 10 |
| 1766161204 | 230 | 13.6 | 15 | 100 | 10 |
| 1766160004 | 232 | 13.6 | 15 | 100 | 10 |
| 1766158804 | 234 | 13.6 | 16 | 100 | 10 |
| 1766157604 | 234 | 13.6 | 15 | 100 | 10 |
| 1766156404 | 232 | 13.6 | 17 | 100 | 10 |
| 1766155204 | 234 | 13.6 | 15 | 100 | 10 |
| 1766154006 | 232 | 13.6 | 17 | 100 | 10 |
| 1766152805 | 228 | 13.6 | 20 | 100 | 10 |
| 1766151604 | 234 | 13.6 | 16 | 100 | 10 |
| 1766150404 | 234 | 13.6 | 16 | 100 | 10 |
| 1766149204 | 234 | 13.6 | 14 | 100 | 10 |
| 1766148004 | 234 | 13.6 | 15 | 100 | 10 |
| 1766146804 | 234 | 13.6 | 14 | 100 | 10 |
| 1766145604 | 230 | 13.6 | 14 | 100 | 10 |
| 1766144404 | 232 | 13.6 | 16 | 100 | 10 |
| 1766143205 | 230 | 13.6 | 15 | 100 | 10 |
| 1766142004 | 234 | 13.6 | 14 | 100 | 10 |
| 1766140804 | 232 | 13.6 | 14 | 100 | 10 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)