APRS Track Direct

My position About ☰

reset

SUNLGT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SUNLGT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753456464	13.67 Volt	490 Pkt	60 Pkt	71 Pcnt
1753456463	13.67 Volt	490 Pkt	60 Pkt	71 Pcnt
1753455863	13.67 Volt	480 Pkt	60 Pkt	70 Pcnt
1753455863	13.67 Volt	480 Pkt	60 Pkt	70 Pcnt
1753455264	13.67 Volt	460 Pkt	50 Pkt	69 Pcnt
1753455263	13.67 Volt	460 Pkt	50 Pkt	69 Pcnt
1753454664	13.67 Volt	490 Pkt	50 Pkt	69 Pcnt
1753454663	13.67 Volt	490 Pkt	50 Pkt	69 Pcnt
1753454064	13.59 Volt	480 Pkt	50 Pkt	70 Pcnt
1753454063	13.59 Volt	480 Pkt	50 Pkt	70 Pcnt
1753453464	13.67 Volt	510 Pkt	50 Pkt	69 Pcnt
1753453463	13.67 Volt	510 Pkt	50 Pkt	69 Pcnt
1753452864	13.59 Volt	540 Pkt	50 Pkt	70 Pcnt
1753452863	13.59 Volt	540 Pkt	50 Pkt	70 Pcnt
1753452264	13.59 Volt	520 Pkt	50 Pkt	69 Pcnt
1753452263	13.59 Volt	520 Pkt	50 Pkt	69 Pcnt
1753451664	13.67 Volt	520 Pkt	50 Pkt	71 Pcnt
1753451663	13.67 Volt	520 Pkt	50 Pkt	71 Pcnt
1753451064	13.67 Volt	480 Pkt	50 Pkt	69 Pcnt
1753451063	13.67 Volt	480 Pkt	50 Pkt	69 Pcnt
1753450464	13.59 Volt	480 Pkt	60 Pkt	66 Pcnt
1753450463	13.59 Volt	480 Pkt	60 Pkt	66 Pcnt
1753449864	13.59 Volt	480 Pkt	60 Pkt	67 Pcnt
1753449863	13.59 Volt	480 Pkt	60 Pkt	67 Pcnt
1753449265	13.59 Volt	480 Pkt	60 Pkt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)