This is the latest recevied telemetry packets stored in our database for station/object EUGENE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Value5* |
|---|---|---|---|---|---|
| 1732257086 | 13.65 Volt | 440 Pkt | 40 Pkt | 86 Pcnt | 0 |
| 1732256486 | 13.65 Volt | 470 Pkt | 40 Pkt | 87 Pcnt | 0 |
| 1732255886 | 13.65 Volt | 480 Pkt | 40 Pkt | 86 Pcnt | 0 |
| 1732255287 | 13.65 Volt | 480 Pkt | 40 Pkt | 87 Pcnt | 0 |
| 1732255286 | 13.65 Volt | 480 Pkt | 40 Pkt | 87 Pcnt | 0 |
| 1732254686 | 13.65 Volt | 490 Pkt | 50 Pkt | 87 Pcnt | 0 |
| 1732254086 | 13.65 Volt | 490 Pkt | 60 Pkt | 85 Pcnt | 0 |
| 1732253486 | 13.58 Volt | 480 Pkt | 60 Pkt | 82 Pcnt | 0 |
| 1732252886 | 13.65 Volt | 450 Pkt | 60 Pkt | 83 Pcnt | 0 |
| 1732252286 | 13.65 Volt | 450 Pkt | 50 Pkt | 83 Pcnt | 0 |
| 1732251687 | 13.65 Volt | 460 Pkt | 50 Pkt | 82 Pcnt | 0 |
| 1732251686 | 13.65 Volt | 460 Pkt | 50 Pkt | 82 Pcnt | 0 |
| 1732251086 | 13.65 Volt | 470 Pkt | 60 Pkt | 83 Pcnt | 0 |
| 1732250486 | 13.65 Volt | 450 Pkt | 40 Pkt | 84 Pcnt | 0 |
| 1732249886 | 13.65 Volt | 450 Pkt | 40 Pkt | 85 Pcnt | 0 |
| 1732249286 | 13.65 Volt | 440 Pkt | 40 Pkt | 81 Pcnt | 0 |
| 1732248686 | 13.65 Volt | 430 Pkt | 40 Pkt | 80 Pcnt | 0 |
| 1732248087 | 13.65 Volt | 430 Pkt | 40 Pkt | 80 Pcnt | 0 |
| 1732248086 | 13.65 Volt | 430 Pkt | 40 Pkt | 80 Pcnt | 0 |
| 1732247486 | 13.65 Volt | 430 Pkt | 40 Pkt | 79 Pcnt | 0 |
| 1732246886 | 13.65 Volt | 480 Pkt | 70 Pkt | 78 Pcnt | 0 |
| 1732246286 | 13.65 Volt | 490 Pkt | 70 Pkt | 77 Pcnt | 0 |
| 1732245686 | 13.65 Volt | 510 Pkt | 80 Pkt | 78 Pcnt | 0 |
| 1732245086 | 13.65 Volt | 500 Pkt | 80 Pkt | 79 Pcnt | 0 |
| 1732244487 | 13.65 Volt | 510 Pkt | 80 Pkt | 79 Pcnt | 0 |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)