This is the latest recevied telemetry packets stored in our database for station/object DL1MBW-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1765923490 | 5 | 834 C | 409 V | 49 M | 0 |
| 1765923222 | 5 | 833 C | 409 V | 52 M | 0 |
| 1765922055 | 4 | 816 C | 409 V | 50 M | 0 |
| 1765918248 | 5 | 842 C | 408 V | 52 M | 0 |
| 1765917898 | 6 | 826 C | 408 V | 54 M | 0 |
| 1765917725 | 5 | 819 C | 409 V | 51 M | 0 |
| 1765917525 | 5 | 810 C | 408 V | 51 M | 0 |
| 1765917351 | 0 | 801 C | 408 V | 55 M | 0 |
| 1765917179 | 6 | 794 C | 409 V | 48 M | 0 |
| 1765916988 | 5 | 786 C | 408 V | 51 M | 0 |
| 1765916806 | 4 | 778 C | 408 V | 54 M | 0 |
| 1765916629 | 6 | 770 C | 408 V | 54 M | 0 |
| 1765916452 | 5 | 760 C | 408 V | 54 M | 0 |
| 1765916226 | 5 | 751 C | 409 V | 50 M | 0 |
| 1765915937 | 4 | 742 C | 408 V | 56 M | 0 |
| 1765915765 | 6 | 735 C | 408 V | 52 M | 0 |
| 1765915605 | 6 | 727 C | 409 V | 51 M | 0 |
| 1765915267 | 6 | 713 C | 408 V | 50 M | 0 |
| 1765914918 | 4 | 696 C | 409 V | 51 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 1, 0
Volt: 0, 1, 0
Alt: 0, 1, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)