APRS Track Direct

My position About ☰

reset

HP2DFA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP2DFA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1732572184	13.19 Volt	190 Pkt	60 Pkt	81 Pcnt	92 Pkt
1732571584	13.27 Volt	190 Pkt	50 Pkt	87 Pcnt	92 Pkt
1732570984	13.19 Volt	200 Pkt	40 Pkt	93 Pcnt	92 Pkt
1732570384	13.27 Volt	210 Pkt	40 Pkt	98 Pcnt	92 Pkt
1732569784	13.35 Volt	220 Pkt	50 Pkt	99 Pcnt	92 Pkt
1732569184	13.19 Volt	220 Pkt	40 Pkt	99 Pcnt	92 Pkt
1732568584	13.19 Volt	220 Pkt	50 Pkt	99 Pcnt	92 Pkt
1732567984	13.27 Volt	230 Pkt	50 Pkt	99 Pcnt	92 Pkt
1732567384	13.19 Volt	220 Pkt	40 Pkt	99 Pcnt	92 Pkt
1732566784	13.27 Volt	210 Pkt	40 Pkt	99 Pcnt	92 Pkt
1732566184	13.19 Volt	210 Pkt	40 Pkt	99 Pcnt	92 Pkt
1732565584	13.19 Volt	210 Pkt	30 Pkt	99 Pcnt	92 Pkt
1732564984	13.19 Volt	200 Pkt	30 Pkt	100 Pcnt	92 Pkt
1732564384	13.27 Volt	190 Pkt	30 Pkt	99 Pcnt	92 Pkt
1732563784	13.27 Volt	190 Pkt	30 Pkt	98 Pcnt	92 Pkt
1732563184	13.27 Volt	190 Pkt	30 Pkt	97 Pcnt	92 Pkt
1732562584	13.19 Volt	180 Pkt	40 Pkt	97 Pcnt	92 Pkt
1732561984	13.35 Volt	180 Pkt	40 Pkt	97 Pcnt	92 Pkt
1732561384	13.35 Volt	180 Pkt	40 Pkt	97 Pcnt	92 Pkt
1732560784	13.19 Volt	170 Pkt	50 Pkt	97 Pcnt	92 Pkt
1732560184	13.19 Volt	170 Pkt	40 Pkt	98 Pcnt	92 Pkt
1732559584	13.27 Volt	180 Pkt	40 Pkt	98 Pcnt	92 Pkt
1732558984	13.27 Volt	170 Pkt	40 Pkt	98 Pcnt	92 Pkt
1732558384	13.27 Volt	180 Pkt	40 Pkt	98 Pcnt	92 Pkt
1732557784	13.19 Volt	180 Pkt	40 Pkt	97 Pcnt	92 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)