This is the latest recevied telemetry packets stored in our database for station/object DO5TY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | ATemp* | AHum* | vRate* | Sats* | Alt* |
|---|---|---|---|---|---|
| 1754171319 | 16.5 | 79.9 | 0 | 12 | 79.6 |
| 1754170789 | 17.6 | 77.1 | -0.1 | 12 | 68 |
| 1754170639 | 17.2 | 77.5 | 0 | 12 | 80.5 |
| 1754170487 | 17.3 | 76.7 | 0.1 | 12 | 73.2 |
| 1754170337 | 17.2 | 77.1 | 0 | 12 | 65.4 |
| 1754170187 | 17.4 | 76.3 | -0.1 | 12 | 58.7 |
| 1754170037 | 17.4 | 76.9 | 0 | 12 | 70.7 |
| 1754169887 | 17 | 78.4 | 0 | 12 | 72.8 |
| 1754169735 | 17.1 | 77.7 | 0 | 12 | 71.3 |
| 1754169585 | 17.2 | 78.3 | 0 | 12 | 65.4 |
| 1754169433 | 17.3 | 77.3 | 0 | 12 | 67.3 |
| 1754169283 | 17.1 | 78.3 | 0 | 12 | 68.1 |
| 1754169133 | 16.9 | 79.3 | 0 | 12 | 69.1 |
| 1754168981 | 16.9 | 79.2 | 0 | 12 | 66.1 |
| 1754168831 | 17 | 79.4 | 0 | 12 | 68.9 |
| 1754168681 | 17.2 | 78.1 | 0 | 12 | 69.7 |
| 1754168531 | 17.6 | 76.4 | 0 | 12 | 70.4 |
| 1754168381 | 17.6 | 77.5 | 0 | 12 | 64.6 |
| 1754168229 | 17.4 | 78.3 | 0 | 12 | 65.4 |
| 1754168079 | 17.4 | 78.8 | 0 | 12 | 60.4 |
| 1754167928 | 17.7 | 78.6 | 0 | 12 | 67.6 |
| 1754167778 | 17.5 | 78.9 | 0 | 12 | 65.3 |
| 1754167627 | 17.7 | 77.7 | 0 | 12 | 68.8 |
| 1754167476 | 17.7 | 77.8 | 0 | 12 | 73.5 |
| 1754167326 | 17.8 | 77.2 | 0 | 12 | 69.5 |
*Used Equation Coefficients:
ATemp: 0, 1, 0
AHum: 0, 1, 0
vRate: 0, 1, 0
Sats: 0, 1, 0
Alt: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)