This is the latest recevied telemetry packets stored in our database for station/object YG1BKV-18. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Water* | Wnow* | Vbat* | Range* | Nval* |
|---|---|---|---|---|---|
| 1794903538 | 12 cm | 12 cm | 3.4 V | 2 mm | 7 n |
| 1794903475 | 12 cm | 12 cm | 3.8 V | 1 mm | 7 n |
| 1794903411 | 12 cm | 12 cm | 3.05 V | 1 mm | 7 n |
| 1794903347 | 12 cm | 12 cm | 3.45 V | 1 mm | 7 n |
| 1794903283 | 12 cm | 12 cm | 4.65 V | 3 mm | 7 n |
| 1794903220 | 12 cm | 12 cm | 4.85 V | 2 mm | 7 n |
| 1794903156 | 12 cm | 12 cm | 3.65 V | 2 mm | 7 n |
| 1794903092 | 12 cm | 12.25 cm | 3.65 V | 1 mm | 7 n |
| 1794903028 | 12 cm | 12 cm | 5.1 V | 2 mm | 7 n |
| 1794902964 | 12 cm | 12 cm | 3.4 V | 0 mm | 7 n |
| 1794902901 | 12 cm | 12 cm | 4.65 V | 1 mm | 7 n |
| 1794902837 | 12 cm | 12 cm | 4.45 V | 1 mm | 7 n |
| 1794902773 | 12 cm | 12 cm | 4.55 V | 1 mm | 7 n |
| 1794902709 | 12 cm | 12 cm | 4.45 V | 2 mm | 7 n |
| 1794902645 | 12.25 cm | 12.25 cm | 4.6 V | 1 mm | 7 n |
| 1794902582 | 12 cm | 12 cm | 4 V | 1 mm | 7 n |
| 1794902518 | 12 cm | 12.25 cm | 3.4 V | 1 mm | 7 n |
| 1794902454 | 12 cm | 12 cm | 4.8 V | 2 mm | 7 n |
| 1794902390 | 12 cm | 12 cm | 4.85 V | 1 mm | 7 n |
| 1794902327 | 12.25 cm | 12.25 cm | 3.9 V | 1 mm | 7 n |
| 1794902263 | 12 cm | 12 cm | 4.35 V | 2 mm | 7 n |
| 1794902199 | 12.25 cm | 12.25 cm | 4.35 V | 1 mm | 7 n |
| 1794902136 | 12 cm | 12 cm | 3.1 V | 2 mm | 7 n |
| 1794902072 | 12 cm | 12.25 cm | 3.75 V | 1 mm | 7 n |
| 1794901999 | 12 cm | 12 cm | 3.35 V | 1 mm | 7 n |
*Used Equation Coefficients:
Water: 0, 0.25, -30
Wnow: 0, 0.25, -30
Vbat: 0, 0.05, 0
Range: 0, 1, 0
Nval: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)