This is the latest recevied telemetry packets stored in our database for station/object DC1MPP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274741 | 21.9 deg C | 57.9 % | 1021.3 hPa | 0 | 0 |
| 1762324704 | 19.5 deg C | 48.7 % | 1021.3 hPa | 0 | 0 |
| 1762323804 | 19.6 deg C | 48.8 % | 1021.3 hPa | 0 | 0 |
| 1762322900 | 19.6 deg C | 49 % | 1021.2 hPa | 0 | 0 |
| 1762322005 | 19.6 deg C | 49.1 % | 1021.3 hPa | 0 | 0 |
| 1762321102 | 19.6 deg C | 49.2 % | 1021.3 hPa | 0 | 0 |
| 1762320202 | 19.6 deg C | 49.3 % | 1021.4 hPa | 0 | 0 |
| 1762319306 | 19.6 deg C | 49.5 % | 1021.4 hPa | 0 | 0 |
| 1762318400 | 19.7 deg C | 49.7 % | 1021.4 hPa | 0 | 0 |
| 1762317496 | 19.7 deg C | 50 % | 1021.4 hPa | 0 | 0 |
| 1762316600 | 19.8 deg C | 50.3 % | 1021.5 hPa | 0 | 0 |
| 1762315698 | 19.8 deg C | 50.8 % | 1021.6 hPa | 0 | 0 |
| 1762314801 | 19.6 deg C | 50.4 % | 1021.7 hPa | 0 | 0 |
| 1762313904 | 19.6 deg C | 50.5 % | 1021.5 hPa | 0 | 0 |
| 1762313008 | 19.7 deg C | 50.6 % | 1021.5 hPa | 0 | 0 |
| 1762312110 | 19.7 deg C | 50.9 % | 1021.4 hPa | 0 | 0 |
| 1762311205 | 19.7 deg C | 51 % | 1021.4 hPa | 0 | 0 |
| 1762310302 | 19.8 deg C | 51 % | 1021.4 hPa | 0 | 0 |
| 1762309406 | 19.8 deg C | 50.9 % | 1021.2 hPa | 0 | 0 |
| 1762308505 | 19.7 deg C | 50.8 % | 1021.3 hPa | 0 | 0 |
| 1762307602 | 19.7 deg C | 50.9 % | 1021.4 hPa | 0 | 0 |
| 1762306700 | 19.7 deg C | 51.2 % | 1021.4 hPa | 0 | 0 |
| 1762305805 | 19.8 deg C | 51.3 % | 1021.4 hPa | 0 | 0 |
| 1762304894 | 19.8 deg C | 51 % | 1021.5 hPa | 0 | 0 |
| 1762303993 | 19.8 deg C | 51 % | 1021.4 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)