This is the latest recevied telemetry packets stored in our database for station/object MB7UM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274681 | 174 | 0 | 0 | 0 | 0 |
| 1762339507 | 175 | 0 | 0 | 0 | 0 |
| 1762338607 | 175 | 0 | 0 | 0 | 0 |
| 1762337708 | 173 | 0 | 0 | 0 | 0 |
| 1762336808 | 172 | 0 | 0 | 0 | 0 |
| 1762335908 | 170 | 0 | 0 | 0 | 0 |
| 1762335008 | 168 | 0 | 0 | 0 | 0 |
| 1762334108 | 167 | 0 | 0 | 0 | 0 |
| 1762333208 | 166 | 0 | 0 | 0 | 0 |
| 1762332308 | 165 | 0 | 0 | 0 | 0 |
| 1762331408 | 166 | 0 | 0 | 0 | 0 |
| 1762330507 | 166 | 0 | 0 | 0 | 0 |
| 1762329608 | 166 | 0 | 0 | 0 | 0 |
| 1762328708 | 166 | 0 | 0 | 0 | 0 |
| 1762327808 | 166 | 0 | 0 | 0 | 0 |
| 1762326908 | 166 | 0 | 0 | 0 | 0 |
| 1762326008 | 166 | 0 | 0 | 0 | 0 |
| 1762325108 | 166 | 0 | 0 | 0 | 0 |
| 1762324208 | 166 | 0 | 0 | 0 | 0 |
| 1762323308 | 166 | 0 | 0 | 0 | 0 |
| 1762322408 | 167 | 0 | 0 | 0 | 0 |
| 1762321508 | 168 | 0 | 0 | 0 | 0 |
| 1762320608 | 168 | 0 | 0 | 0 | 0 |
| 1762319707 | 168 | 0 | 0 | 0 | 0 |
| 1762318807 | 169 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)