This is the latest recevied telemetry packets stored in our database for station/object SP8SD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794911914 | 194 Count | 683 Count | 136 Count | 4.22 VDC | 0.14 VDC |
| 1794911614 | 191 Count | 661 Count | 134 Count | 4.21 VDC | 0.14 VDC |
| 1794911313 | 188 Count | 642 Count | 132 Count | 4.26 VDC | 0.14 VDC |
| 1794911012 | 185 Count | 630 Count | 130 Count | 4.24 VDC | 0.14 VDC |
| 1794910712 | 183 Count | 621 Count | 129 Count | 4.22 VDC | 0.14 VDC |
| 1794910411 | 180 Count | 612 Count | 127 Count | 4.22 VDC | 0.14 VDC |
| 1794910111 | 175 Count | 595 Count | 123 Count | 4.26 VDC | 0.14 VDC |
| 1794909810 | 172 Count | 575 Count | 121 Count | 4.27 VDC | 0.14 VDC |
| 1794909510 | 167 Count | 558 Count | 117 Count | 4.21 VDC | 0.14 VDC |
| 1794909209 | 165 Count | 548 Count | 116 Count | 4.2 VDC | 0.14 VDC |
| 1794908907 | 155 Count | 526 Count | 107 Count | 4.27 VDC | 0.14 VDC |
| 1794908607 | 151 Count | 510 Count | 104 Count | 4.25 VDC | 0.14 VDC |
| 1794908306 | 147 Count | 497 Count | 101 Count | 4.2 VDC | 0.14 VDC |
| 1794908005 | 140 Count | 478 Count | 95 Count | 4.19 VDC | 0.14 VDC |
| 1794907705 | 138 Count | 472 Count | 94 Count | 4.27 VDC | 0.14 VDC |
| 1794907404 | 136 Count | 466 Count | 93 Count | 4.21 VDC | 0.14 VDC |
| 1794907104 | 134 Count | 457 Count | 92 Count | 4.24 VDC | 0.14 VDC |
| 1794906803 | 130 Count | 450 Count | 89 Count | 4.26 VDC | 0.14 VDC |
| 1794906502 | 128 Count | 442 Count | 88 Count | 4.24 VDC | 0.14 VDC |
| 1794906201 | 125 Count | 435 Count | 86 Count | 4.27 VDC | 0.14 VDC |
| 1794905900 | 123 Count | 430 Count | 85 Count | 4.28 VDC | 0.14 VDC |
| 1794905600 | 119 Count | 420 Count | 82 Count | 4.24 VDC | 0.14 VDC |
| 1794905299 | 118 Count | 412 Count | 82 Count | 4.21 VDC | 0.14 VDC |
| 1794904998 | 114 Count | 400 Count | 79 Count | 4.25 VDC | 0.14 VDC |
| 1794904698 | 112 Count | 381 Count | 78 Count | 4.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)