APRS Track Direct

My position About ☰

reset

BH2WAV-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BH2WAV-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU-Used*	MEM-Used*	UpSpeed*	DownSpeed*
1836274680	12.59 %	27 %	18.88 KBps	10.28 KBps
1778049908	0.5 %	27 %	16.14 KBps	9.82 KBps
1778049005	6.06 %	27 %	15.14 KBps	10.25 KBps
1778048104	10.03 %	27 %	10.98 KBps	7.24 KBps
1778047205	0 %	27 %	14.84 KBps	10 KBps
1778046306	13.38 %	27 %	15.69 KBps	9.02 KBps
1778045409	2.77 %	27 %	11.88 KBps	7.54 KBps
1778044504	4.01 %	27 %	15.91 KBps	8.6 KBps
1778043608	1.01 %	27 %	15.4 KBps	9.55 KBps
1778042708	2.76 %	27 %	16.9 KBps	9.65 KBps
1778041809	4.52 %	27 %	12.22 KBps	7.92 KBps
1778040907	5.03 %	27 %	9.07 KBps	6.63 KBps
1778040005	21.66 %	27 %	15.59 KBps	9.72 KBps
1778039105	23.1 %	27 %	12.77 KBps	8.65 KBps
1778038209	36.93 %	27 %	15.2 KBps	9.14 KBps
1778037310	19.7 %	27 %	14.31 KBps	9.39 KBps
1778036405	22.06 %	27 %	15.7 KBps	9.06 KBps
1778035508	17.01 %	27 %	16.6 KBps	10.04 KBps
1778034605	0.76 %	27 %	19.14 KBps	11.42 KBps
1778033711	0 %	27 %	17.19 KBps	10.33 KBps
1778032807	8.84 %	27 %	9.84 KBps	6.42 KBps
1778031908	3.27 %	27 %	12.31 KBps	8 KBps
1778031006	24.18 %	27 %	14.84 KBps	9.47 KBps
1778030108	6.8 %	27 %	12.95 KBps	8.52 KBps
1778029207	2.5 %	27 %	12.71 KBps	7.02 KBps

*Used Equation Coefficients:

CPU-Used: 0, 1, 0

CPU-Temp: 0, 1, 0

MEM-Used: 0, 1, 0

UpSpeed: 0, 1, 0

DownSpeed: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)