This is the latest recevied telemetry packets stored in our database for station/object SP4AGA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274381 | 640 | 51 | 0 | 0 | 0 |
| 1836274230 | 640 | 51 | 0 | 0 | 0 |
| 1770153606 | 549 | 4 | 0 | 0 | 0 |
| 1770153011 | 550 | 6 | 0 | 0 | 0 |
| 1770152406 | 551 | 4 | 0 | 0 | 0 |
| 1770151811 | 556 | 6 | 0 | 0 | 0 |
| 1770151206 | 554 | 1 | 0 | 0 | 0 |
| 1770150611 | 555 | 3 | 0 | 0 | 0 |
| 1770150006 | 555 | 4 | 0 | 0 | 0 |
| 1770149406 | 555 | 5 | 0 | 0 | 0 |
| 1770148810 | 555 | 2 | 0 | 0 | 0 |
| 1770148206 | 555 | 2 | 0 | 0 | 0 |
| 1770147611 | 555 | 4 | 0 | 0 | 0 |
| 1770147006 | 559 | 2 | 0 | 0 | 0 |
| 1770146411 | 555 | 5 | 0 | 0 | 0 |
| 1770145806 | 550 | 2 | 0 | 0 | 0 |
| 1770145207 | 555 | 3 | 0 | 0 | 0 |
| 1770144610 | 556 | 4 | 0 | 0 | 0 |
| 1770144006 | 555 | 3 | 0 | 0 | 0 |
| 1770143410 | 560 | 3 | 0 | 0 | 0 |
| 1770142806 | 555 | 2 | 0 | 0 | 0 |
| 1770142211 | 560 | 1 | 0 | 0 | 0 |
| 1770141606 | 559 | 1 | 0 | 0 | 0 |
| 1770141018 | 560 | 4 | 0 | 0 | 0 |
| 1770140411 | 560 | 2 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)