APRS Track Direct

My position About ☰

reset

DG1JLA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG1JLA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1745049041	12.4 Volt	520 Pkt	430 Pkt	88 Pcnt	87 Pcnt
1745048141	12.4 Volt	610 Pkt	440 Pkt	88 Pcnt	87 Pcnt
1745047241	12.4 Volt	740 Pkt	440 Pkt	88 Pcnt	87 Pcnt
1745046341	12.4 Volt	790 Pkt	450 Pkt	91 Pcnt	87 Pcnt
1745045441	12.4 Volt	590 Pkt	420 Pkt	91 Pcnt	87 Pcnt
1745044541	12.4 Volt	560 Pkt	410 Pkt	90 Pcnt	87 Pcnt
1745043641	12.4 Volt	710 Pkt	410 Pkt	90 Pcnt	87 Pcnt
1745042741	12.4 Volt	540 Pkt	400 Pkt	90 Pcnt	87 Pcnt
1745041841	12.4 Volt	670 Pkt	410 Pkt	92 Pcnt	87 Pcnt
1745040941	12.4 Volt	580 Pkt	410 Pkt	93 Pcnt	87 Pcnt
1745040041	12.4 Volt	620 Pkt	430 Pkt	95 Pcnt	87 Pcnt
1745039141	12.4 Volt	620 Pkt	430 Pkt	95 Pcnt	87 Pcnt
1745038241	12.4 Volt	660 Pkt	430 Pkt	92 Pcnt	87 Pcnt
1745037341	12.4 Volt	740 Pkt	420 Pkt	90 Pcnt	87 Pcnt
1745036441	12.4 Volt	680 Pkt	400 Pkt	86 Pcnt	87 Pcnt
1745035541	12.4 Volt	450 Pkt	390 Pkt	84 Pcnt	87 Pcnt
1745034641	12.4 Volt	660 Pkt	410 Pkt	85 Pcnt	87 Pcnt
1745033741	12.4 Volt	640 Pkt	430 Pkt	86 Pcnt	87 Pcnt
1745032841	12.4 Volt	600 Pkt	440 Pkt	87 Pcnt	87 Pcnt
1745031941	12.4 Volt	590 Pkt	440 Pkt	90 Pcnt	87 Pcnt
1745031041	12.4 Volt	760 Pkt	440 Pkt	90 Pcnt	87 Pcnt
1745030141	12.4 Volt	720 Pkt	420 Pkt	92 Pcnt	87 Pcnt
1745029241	12.4 Volt	620 Pkt	420 Pkt	91 Pcnt	87 Pcnt
1745028342	12.4 Volt	650 Pkt	410 Pkt	90 Pcnt	87 Pcnt
1745027442	12.4 Volt	560 Pkt	410 Pkt	88 Pcnt	87 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)