This is the latest recevied telemetry packets stored in our database for station/object SR9WXS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792143436 | 103 | 12 | 10 | 0 | 100 |
| 1792142837 | 117 | 20 | 20 | 0 | 100 |
| 1792142236 | 114 | 21 | 19 | 0 | 100 |
| 1792141632 | 119 | 14 | 13 | 0 | 100 |
| 1792141032 | 106 | 19 | 19 | 0 | 100 |
| 1792140432 | 113 | 10 | 8 | 0 | 100 |
| 1792138887 | 140 | 9 | 7 | 0 | 100 |
| 1792138284 | 115 | 10 | 9 | 1 | 100 |
| 1792137684 | 115 | 13 | 12 | 0 | 100 |
| 1792137084 | 87 | 7 | 5 | 0 | 100 |
| 1792136140 | 96 | 4 | 3 | 0 | 100 |
| 1792135539 | 112 | 9 | 7 | 0 | 100 |
| 1792134936 | 113 | 9 | 8 | 0 | 100 |
| 1792134335 | 111 | 10 | 9 | 0 | 100 |
| 1792133735 | 97 | 12 | 10 | 0 | 100 |
| 1792132010 | 132 | 15 | 13 | 0 | 100 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)