This is the latest recevied telemetry packets stored in our database for station/object VK6HGR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | MainsV* | SolarW* | DCVolts* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754229604 | 241.7 Volts | 0 Watts | 13.62 Volts | 0 | 0 |
| 1754228705 | 240.9 Volts | 0 Watts | 13.64 Volts | 0 | 0 |
| 1754227803 | 242.1 Volts | 0 Watts | 13.62 Volts | 0 | 0 |
| 1754226904 | 241.3 Volts | 0 Watts | 13.63 Volts | 0 | 0 |
| 1754226002 | 242.8 Volts | 0 Watts | 13.61 Volts | 0 | 0 |
| 1754225104 | 244.3 Volts | 0 Watts | 13.63 Volts | 0 | 0 |
| 1754224204 | 241.8 Volts | 0 Watts | 13.64 Volts | 0 | 0 |
| 1754223305 | 241.7 Volts | 0 Watts | 13.63 Volts | 0 | 0 |
| 1754222404 | 244.8 Volts | 0 Watts | 13.6 Volts | 0 | 0 |
| 1754221504 | 244.1 Volts | 0 Watts | 13.62 Volts | 0 | 0 |
| 1754220603 | 244.7 Volts | 0 Watts | 13.61 Volts | 0 | 0 |
| 1754219702 | 244.1 Volts | 0 Watts | 13.62 Volts | 0 | 0 |
| 1754218802 | 243.6 Volts | 0 Watts | 13.64 Volts | 0 | 0 |
| 1754217905 | 241.3 Volts | 0 Watts | 13.64 Volts | 0 | 0 |
| 1754217007 | 242 Volts | 0 Watts | 13.63 Volts | 0 | 0 |
| 1754216104 | 241.7 Volts | 0 Watts | 13.64 Volts | 0 | 0 |
| 1754215202 | 242.8 Volts | 0 Watts | 13.64 Volts | 0 | 0 |
| 1754214304 | 241.8 Volts | 0 Watts | 13.68 Volts | 0 | 0 |
| 1754213405 | 239.3 Volts | 12 Watts | 13.68 Volts | 0 | 0 |
| 1754212503 | 239 Volts | 96 Watts | 13.68 Volts | 0 | 0 |
| 1754211602 | 238.7 Volts | 169 Watts | 13.68 Volts | 0 | 0 |
| 1754210703 | 239.7 Volts | 195 Watts | 13.67 Volts | 0 | 0 |
| 1754209807 | 239.5 Volts | 155 Watts | 13.69 Volts | 0 | 0 |
| 1754208905 | 240.2 Volts | 583 Watts | 13.68 Volts | 0 | 0 |
| 1754208004 | 238.3 Volts | 986 Watts | 13.69 Volts | 0 | 0 |
*Used Equation Coefficients:
MainsV: 0, 1, 0
SolarW: 0, 1, 0
DCVolts: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)