APRS Track Direct

My position About ☰

reset

W1FN-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W1FN-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786719427	13.28 Volt	360 Pkt	90 Pkt	80 Pcnt
1786717627	13.28 Volt	370 Pkt	80 Pkt	76 Pcnt
1786715827	13.28 Volt	510 Pkt	110 Pkt	83 Pcnt
1786714027	13.28 Volt	610 Pkt	150 Pkt	84 Pcnt
1786712227	13.2 Volt	650 Pkt	160 Pkt	80 Pcnt
1786710427	13.2 Volt	620 Pkt	130 Pkt	81 Pcnt
1786708627	13.2 Volt	600 Pkt	120 Pkt	82 Pcnt
1786706827	13.2 Volt	580 Pkt	140 Pkt	82 Pcnt
1786705027	13.2 Volt	550 Pkt	140 Pkt	82 Pcnt
1786703227	13.2 Volt	560 Pkt	130 Pkt	83 Pcnt
1786701428	13.2 Volt	610 Pkt	130 Pkt	84 Pcnt
1786699628	13.2 Volt	610 Pkt	120 Pkt	81 Pcnt
1786697827	13.2 Volt	570 Pkt	120 Pkt	79 Pcnt
1786696027	13.2 Volt	540 Pkt	130 Pkt	82 Pcnt
1786694228	13.2 Volt	560 Pkt	120 Pkt	85 Pcnt
1786692428	13.2 Volt	580 Pkt	130 Pkt	86 Pcnt
1786690628	13.2 Volt	550 Pkt	130 Pkt	84 Pcnt
1786688828	13.2 Volt	530 Pkt	110 Pkt	84 Pcnt
1786687028	13.2 Volt	530 Pkt	100 Pkt	87 Pcnt
1786685228	13.2 Volt	550 Pkt	100 Pkt	88 Pcnt
1786683428	13.28 Volt	520 Pkt	110 Pkt	85 Pcnt
1786681628	13.28 Volt	470 Pkt	100 Pkt	84 Pcnt
1786679828	13.28 Volt	470 Pkt	90 Pkt	82 Pcnt
1786678028	13.28 Volt	460 Pkt	80 Pkt	81 Pcnt
1786676228	13.28 Volt	450 Pkt	90 Pkt	81 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)