APRS Track Direct

My position About ☰

reset

WX5II-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WX5II-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790684835	13.43 Volt	320 Pkt	170 Pkt	64 Pcnt
1790682735	13.43 Volt	260 Pkt	110 Pkt	65 Pcnt
1790681235	13.43 Volt	270 Pkt	100 Pkt	59 Pcnt
1790678835	13.43 Volt	240 Pkt	90 Pkt	55 Pcnt
1790677635	13.43 Volt	230 Pkt	90 Pkt	53 Pcnt
1790674936	13.43 Volt	210 Pkt	90 Pkt	50 Pcnt
1790674035	13.43 Volt	210 Pkt	100 Pkt	50 Pcnt
1790671036	13.43 Volt	220 Pkt	110 Pkt	49 Pcnt
1790670435	13.43 Volt	220 Pkt	110 Pkt	50 Pcnt
1790667136	13.43 Volt	240 Pkt	110 Pkt	58 Pcnt
1790666835	13.43 Volt	240 Pkt	110 Pkt	58 Pcnt
1790663236	13.35 Volt	310 Pkt	120 Pkt	70 Pcnt
1790663235	13.35 Volt	310 Pkt	120 Pkt	70 Pcnt
1790659635	13.43 Volt	320 Pkt	130 Pkt	73 Pcnt
1790659336	13.43 Volt	320 Pkt	130 Pkt	72 Pcnt
1790656035	13.43 Volt	310 Pkt	90 Pkt	80 Pcnt
1790655436	13.43 Volt	300 Pkt	90 Pkt	79 Pcnt
1790652435	13.43 Volt	220 Pkt	90 Pkt	71 Pcnt
1790651536	13.35 Volt	210 Pkt	90 Pkt	74 Pcnt
1790648835	13.43 Volt	190 Pkt	80 Pkt	76 Pcnt
1790647636	13.43 Volt	220 Pkt	80 Pkt	75 Pcnt
1790645235	13.43 Volt	260 Pkt	100 Pkt	71 Pcnt
1790643736	13.43 Volt	230 Pkt	100 Pkt	73 Pcnt
1790641635	13.43 Volt	220 Pkt	100 Pkt	76 Pcnt
1790639837	13.43 Volt	220 Pkt	120 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)