This is the latest recevied telemetry packets stored in our database for station/object OE3BCB-22. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274378 | 315 | 0 | 0 | 0 | 0 |
| 1836274228 | 309 | 0 | 0 | 0 | 0 |
| 1774475403 | 239 | 0 | 0 | 0 | 0 |
| 1774474803 | 250 | 0 | 0 | 0 | 0 |
| 1774474203 | 239 | 0 | 0 | 0 | 0 |
| 1774473604 | 250 | 0 | 0 | 0 | 0 |
| 1774473004 | 256 | 0 | 0 | 0 | 0 |
| 1774472404 | 256 | 0 | 0 | 0 | 0 |
| 1774471804 | 261 | 0 | 0 | 0 | 0 |
| 1774471203 | 266 | 0 | 0 | 0 | 0 |
| 1774470604 | 277 | 0 | 0 | 0 | 0 |
| 1774470004 | 282 | 0 | 0 | 0 | 0 |
| 1774469404 | 282 | 0 | 0 | 0 | 0 |
| 1774468804 | 293 | 0 | 0 | 0 | 0 |
| 1774468203 | 293 | 0 | 0 | 0 | 0 |
| 1774467604 | 299 | 0 | 0 | 0 | 0 |
| 1774467003 | 304 | 0 | 0 | 0 | 0 |
| 1774466404 | 315 | 0 | 0 | 0 | 0 |
| 1774465803 | 326 | 0 | 0 | 0 | 0 |
| 1774465203 | 331 | 0 | 0 | 0 | 0 |
| 1774464603 | 336 | 0 | 0 | 0 | 0 |
| 1774464004 | 336 | 0 | 0 | 0 | 0 |
| 1774463404 | 342 | 0 | 0 | 0 | 0 |
| 1774462804 | 342 | 0 | 0 | 0 | 0 |
| 1774462204 | 347 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)