This is the latest recevied telemetry packets stored in our database for station/object S58W-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Int Temp* | Int Humidity* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274676 | 30.1 Deg C | 32.5 % RH | 0 | 0 | 0 |
| 1774103404 | 25.8 Deg C | 21.5 % RH | 0 | 0 | 0 |
| 1774102504 | 25.4 Deg C | 21.1 % RH | 0 | 0 | 0 |
| 1774101602 | 24.7 Deg C | 21 % RH | 0 | 0 | 0 |
| 1774100704 | 25.3 Deg C | 21 % RH | 0 | 0 | 0 |
| 1774099803 | 26.1 Deg C | 21.6 % RH | 0 | 0 | 0 |
| 1774098902 | 26.5 Deg C | 21.6 % RH | 0 | 0 | 0 |
| 1774098004 | 26.4 Deg C | 21.3 % RH | 0 | 0 | 0 |
| 1774097104 | 26.3 Deg C | 21.3 % RH | 0 | 0 | 0 |
| 1774096203 | 26.2 Deg C | 21.4 % RH | 0 | 0 | 0 |
| 1774095303 | 26.2 Deg C | 21.6 % RH | 0 | 0 | 0 |
| 1774094403 | 26 Deg C | 21.4 % RH | 0 | 0 | 0 |
| 1774093504 | 25.8 Deg C | 21.3 % RH | 0 | 0 | 0 |
| 1774092604 | 25.5 Deg C | 21.3 % RH | 0 | 0 | 0 |
| 1774091702 | 25 Deg C | 21.1 % RH | 0 | 0 | 0 |
| 1774090803 | 25.8 Deg C | 21.5 % RH | 0 | 0 | 0 |
| 1774089903 | 26.7 Deg C | 22 % RH | 0 | 0 | 0 |
| 1774089003 | 26.6 Deg C | 21.9 % RH | 0 | 0 | 0 |
| 1774088103 | 26.6 Deg C | 22 % RH | 0 | 0 | 0 |
| 1774087203 | 26.3 Deg C | 22.1 % RH | 0 | 0 | 0 |
| 1774086303 | 26.2 Deg C | 21.8 % RH | 0 | 0 | 0 |
| 1774085404 | 25.9 Deg C | 21.7 % RH | 0 | 0 | 0 |
| 1774084503 | 25.6 Deg C | 21.6 % RH | 0 | 0 | 0 |
| 1774083604 | 25 Deg C | 21.2 % RH | 0 | 0 | 0 |
| 1774082703 | 25.6 Deg C | 21.4 % RH | 0 | 0 | 0 |
*Used Equation Coefficients:
Int Temp: 0, 0.1, 0
Int Humidity: 0, 0.1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)