This is the latest recevied telemetry packets stored in our database for station/object XE1RCU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1758222791 | 14.1 Volt | 50 Pkt | 0 Pkt | 54 Pcnt | 0 None |
| 1758222191 | 14.1 Volt | 50 Pkt | 0 Pkt | 57 Pcnt | 0 None |
| 1758221591 | 14.1 Volt | 30 Pkt | 0 Pkt | 52 Pcnt | 0 None |
| 1758220991 | 14.1 Volt | 40 Pkt | 0 Pkt | 67 Pcnt | 0 None |
| 1758220391 | 14.1 Volt | 40 Pkt | 0 Pkt | 71 Pcnt | 0 None |
| 1758219791 | 14.1 Volt | 50 Pkt | 0 Pkt | 68 Pcnt | 0 None |
| 1758219191 | 14.1 Volt | 40 Pkt | 0 Pkt | 70 Pcnt | 0 None |
| 1758218591 | 14.1 Volt | 40 Pkt | 0 Pkt | 64 Pcnt | 0 None |
| 1758217991 | 14.1 Volt | 30 Pkt | 0 Pkt | 64 Pcnt | 0 None |
| 1758217391 | 14.1 Volt | 30 Pkt | 0 Pkt | 67 Pcnt | 0 None |
| 1758216791 | 14.1 Volt | 30 Pkt | 0 Pkt | 69 Pcnt | 0 None |
| 1758216191 | 14.1 Volt | 30 Pkt | 0 Pkt | 77 Pcnt | 0 None |
| 1758215592 | 14.1 Volt | 30 Pkt | 0 Pkt | 80 Pcnt | 0 None |
| 1758214991 | 14.1 Volt | 40 Pkt | 0 Pkt | 90 Pcnt | 0 None |
| 1758214392 | 14.1 Volt | 30 Pkt | 0 Pkt | 87 Pcnt | 0 None |
| 1758213792 | 14.1 Volt | 40 Pkt | 0 Pkt | 89 Pcnt | 0 None |
| 1758213192 | 14.1 Volt | 30 Pkt | 0 Pkt | 88 Pcnt | 0 None |
| 1758212592 | 14.1 Volt | 40 Pkt | 0 Pkt | 88 Pcnt | 0 None |
| 1758211992 | 14.1 Volt | 30 Pkt | 0 Pkt | 88 Pcnt | 0 None |
| 1758211392 | 14.1 Volt | 30 Pkt | 0 Pkt | 83 Pcnt | 0 None |
| 1758210792 | 14.1 Volt | 20 Pkt | 0 Pkt | 65 Pcnt | 0 None |
| 1758210192 | 14.1 Volt | 30 Pkt | 0 Pkt | 65 Pcnt | 0 None |
| 1758209592 | 14.1 Volt | 30 Pkt | 0 Pkt | 67 Pcnt | 0 None |
| 1758208992 | 14.1 Volt | 40 Pkt | 0 Pkt | 71 Pcnt | 0 None |
| 1758208392 | 13.88 Volt | 60 Pkt | 0 Pkt | 72 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)