APRS Track Direct

My position About ☰

reset

BH9DX-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BH9DX-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1753642997	0.57 Load	52.62 DegC	530 Mb	535 Pkt	204 Pkt
1753642698	0.59 Load	52.62 DegC	528 Mb	520 Pkt	208 Pkt
1753642397	0.59 Load	51.54 DegC	536 Mb	521 Pkt	204 Pkt
1753642098	0.55 Load	51.54 DegC	537 Mb	548 Pkt	220 Pkt
1753641797	0.55 Load	52.62 DegC	529 Mb	558 Pkt	206 Pkt
1753641498	0.62 Load	50.46 DegC	526 Mb	553 Pkt	209 Pkt
1753641198	0.56 Load	52.08 DegC	532 Mb	542 Pkt	200 Pkt
1753640897	0.56 Load	52.08 DegC	531 Mb	572 Pkt	213 Pkt
1753640597	0.56 Load	51.54 DegC	534 Mb	548 Pkt	195 Pkt
1753640298	0.57 Load	52.62 DegC	531 Mb	572 Pkt	210 Pkt
1753640000	0.6 Load	52.62 DegC	528 Mb	533 Pkt	199 Pkt
1753639698	0.6 Load	50.46 DegC	532 Mb	583 Pkt	199 Pkt
1753639398	0.64 Load	50.46 DegC	527 Mb	606 Pkt	206 Pkt
1753639098	0.62 Load	50.46 DegC	537 Mb	544 Pkt	204 Pkt
1753638798	0.61 Load	49.39 DegC	530 Mb	609 Pkt	222 Pkt
1753638497	0.53 Load	51 DegC	530 Mb	594 Pkt	227 Pkt
1753638198	0.59 Load	50.46 DegC	520 Mb	612 Pkt	233 Pkt
1753637897	0.64 Load	51 DegC	530 Mb	623 Pkt	233 Pkt
1753637598	0.66 Load	49.39 DegC	527 Mb	668 Pkt	255 Pkt
1753637298	0.65 Load	49.93 DegC	527 Mb	661 Pkt	230 Pkt
1753636998	0.64 Load	50.46 DegC	531 Mb	649 Pkt	235 Pkt
1753636698	0.6 Load	49.93 DegC	527 Mb	682 Pkt	245 Pkt
1753636397	0.57 Load	50.46 DegC	527 Mb	721 Pkt	255 Pkt
1753636097	0.62 Load	50.46 DegC	532 Mb	751 Pkt	262 Pkt
1753635797	0.57 Load	51.54 DegC	523 Mb	960 Pkt	323 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)