This is the latest recevied telemetry packets stored in our database for station/object DK7JL-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPUTemp* | DiskUsage* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753762203 | 43 deg.C | 27 % | 0 | 0 | 0 |
| 1753758603 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753755003 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753751402 | 43 deg.C | 27 % | 0 | 0 | 0 |
| 1753747803 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753744203 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753740603 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753737004 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753733403 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753729803 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753726203 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753722603 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753719003 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753715403 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753711803 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753708203 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753704603 | 45 deg.C | 27 % | 0 | 0 | 0 |
| 1753701003 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753697403 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753693803 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753690203 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753686603 | 44 deg.C | 27 % | 0 | 0 | 0 |
| 1753683002 | 43 deg.C | 27 % | 0 | 0 | 0 |
| 1753679402 | 45 deg.C | 27 % | 0 | 0 | 0 |
*Used Equation Coefficients:
CPUTemp: 0, 1, 0
DiskUsage: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)