APRS Track Direct

My position About ☰

reset

WA6IAJ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA6IAJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1786727264	14.03 Volt	440 Pkt	10 Pkt	98 Pcnt	21.5 C
1786726664	14.03 Volt	450 Pkt	10 Pkt	98 Pcnt	21.5 C
1786726064	13.95 Volt	460 Pkt	10 Pkt	99 Pcnt	21.5 C
1786725464	14.03 Volt	460 Pkt	10 Pkt	99 Pcnt	21.5 C
1786724864	14.03 Volt	460 Pkt	10 Pkt	99 Pcnt	21.5 C
1786724264	14.03 Volt	470 Pkt	10 Pkt	99 Pcnt	21.5 C
1786723664	14.03 Volt	510 Pkt	10 Pkt	99 Pcnt	21.5 C
1786723064	14.03 Volt	510 Pkt	10 Pkt	99 Pcnt	21.5 C
1786722464	14.03 Volt	510 Pkt	10 Pkt	99 Pcnt	21.5 C
1786721864	14.03 Volt	500 Pkt	10 Pkt	99 Pcnt	21.5 C
1786721265	14.03 Volt	490 Pkt	10 Pkt	98 Pcnt	22 C
1786720664	13.95 Volt	450 Pkt	10 Pkt	98 Pcnt	22 C
1786720064	14.03 Volt	410 Pkt	10 Pkt	98 Pcnt	22 C
1786719464	14.03 Volt	390 Pkt	10 Pkt	98 Pcnt	22 C
1786718864	14.03 Volt	370 Pkt	10 Pkt	98 Pcnt	22 C
1786718264	14.03 Volt	380 Pkt	10 Pkt	98 Pcnt	22 C
1786717666	14.03 Volt	370 Pkt	20 Pkt	98 Pcnt	22 C
1786717064	14.03 Volt	370 Pkt	20 Pkt	98 Pcnt	22 C
1786716464	14.03 Volt	380 Pkt	10 Pkt	98 Pcnt	22 C
1786715864	14.03 Volt	390 Pkt	20 Pkt	98 Pcnt	22 C
1786715265	14.03 Volt	400 Pkt	20 Pkt	98 Pcnt	22 C
1786714665	14.03 Volt	390 Pkt	20 Pkt	98 Pcnt	22 C
1786714064	14.03 Volt	390 Pkt	20 Pkt	98 Pcnt	22 C
1786713464	13.95 Volt	390 Pkt	20 Pkt	98 Pcnt	22 C
1786712864	13.95 Volt	400 Pkt	20 Pkt	99 Pcnt	22 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)