APRS Track Direct

My position About ☰

reset

N3LLO-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N3LLO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732273925	0.23 Rx Erlang	0 Tx Erlang	201 count/10m	63 count/10m	0 count/10m
1732272725	0.23 Rx Erlang	0 Tx Erlang	205 count/10m	59 count/10m	0 count/10m
1732271525	0.2 Rx Erlang	0 Tx Erlang	181 count/10m	59 count/10m	0 count/10m
1732270325	0.23 Rx Erlang	0 Tx Erlang	191 count/10m	62 count/10m	0 count/10m
1732269125	0.22 Rx Erlang	0 Tx Erlang	196 count/10m	73 count/10m	0 count/10m
1732267925	0.22 Rx Erlang	0 Tx Erlang	194 count/10m	54 count/10m	0 count/10m
1732266725	0.23 Rx Erlang	0 Tx Erlang	204 count/10m	72 count/10m	0 count/10m
1732265525	0.22 Rx Erlang	0 Tx Erlang	193 count/10m	70 count/10m	0 count/10m
1732264325	0.22 Rx Erlang	0 Tx Erlang	206 count/10m	60 count/10m	0 count/10m
1732263125	0.21 Rx Erlang	0 Tx Erlang	187 count/10m	59 count/10m	0 count/10m
1732261925	0.22 Rx Erlang	0 Tx Erlang	194 count/10m	53 count/10m	0 count/10m
1732260725	0.22 Rx Erlang	0 Tx Erlang	188 count/10m	54 count/10m	0 count/10m
1732259525	0.21 Rx Erlang	0 Tx Erlang	184 count/10m	52 count/10m	0 count/10m
1732258325	0.22 Rx Erlang	0 Tx Erlang	197 count/10m	68 count/10m	0 count/10m
1732257125	0.22 Rx Erlang	0 Tx Erlang	196 count/10m	65 count/10m	0 count/10m
1732255925	0.21 Rx Erlang	0 Tx Erlang	182 count/10m	54 count/10m	0 count/10m
1732254725	0.22 Rx Erlang	0 Tx Erlang	195 count/10m	50 count/10m	0 count/10m
1732253525	0.2 Rx Erlang	0 Tx Erlang	187 count/10m	55 count/10m	0 count/10m
1732252325	0.23 Rx Erlang	0 Tx Erlang	189 count/10m	66 count/10m	0 count/10m
1732251125	0.21 Rx Erlang	0 Tx Erlang	188 count/10m	65 count/10m	0 count/10m
1732249925	0.24 Rx Erlang	0 Tx Erlang	205 count/10m	69 count/10m	0 count/10m
1732248725	0.22 Rx Erlang	0 Tx Erlang	197 count/10m	72 count/10m	0 count/10m
1732247525	0.21 Rx Erlang	0 Tx Erlang	183 count/10m	57 count/10m	0 count/10m
1732246325	0.23 Rx Erlang	0 Tx Erlang	192 count/10m	80 count/10m	0 count/10m
1732245125	0.23 Rx Erlang	0 Tx Erlang	206 count/10m	82 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)