APRS Track Direct

My position About ☰

reset

SR5E Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5E. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	CPU Usage*	Temp DS1*	Temp DS2*
1762287603	33 Deg.C	2 %	31.6 Deg.C	31.6 Deg.C
1762287002	35 Deg.C	2 %	31.3 Deg.C	31.3 Deg.C
1762286406	34 Deg.C	2 %	32.1 Deg.C	32.1 Deg.C
1762285803	34 Deg.C	2 %	33.4 Deg.C	33.4 Deg.C
1762285206	33 Deg.C	2 %	33.5 Deg.C	33.5 Deg.C
1762284603	33 Deg.C	2 %	31.4 Deg.C	31.4 Deg.C
1762284006	35 Deg.C	2 %	30.8 Deg.C	30.8 Deg.C
1762283403	34 Deg.C	2 %	31 Deg.C	31 Deg.C
1762282803	35 Deg.C	2 %	31.9 Deg.C	31.9 Deg.C
1762282206	33 Deg.C	2 %	31.6 Deg.C	31.6 Deg.C
1762281602	33 Deg.C	2 %	32.7 Deg.C	32.7 Deg.C
1762281006	33 Deg.C	2 %	32 Deg.C	32 Deg.C
1762280403	34 Deg.C	2 %	32.8 Deg.C	32.8 Deg.C
1762279806	33 Deg.C	2 %	32.7 Deg.C	32.7 Deg.C
1762279204	34 Deg.C	2 %	37.5 Deg.C	37.5 Deg.C
1762278602	36 Deg.C	2 %	34.6 Deg.C	34.6 Deg.C
1762278006	36 Deg.C	2 %	32 Deg.C	32 Deg.C
1762277403	34 Deg.C	2 %	32.1 Deg.C	32.1 Deg.C
1762276202	33 Deg.C	2 %	31.5 Deg.C	31.5 Deg.C
1762275606	33 Deg.C	2 %	31.4 Deg.C	31.4 Deg.C
1762275002	32 Deg.C	2 %	33.8 Deg.C	33.8 Deg.C
1762274403	32 Deg.C	2 %	39.4 Deg.C	39.4 Deg.C
1762273812	35 Deg.C	2 %	39.1 Deg.C	39.1 Deg.C
1762273202	34 Deg.C	2 %	30.1 Deg.C	30.1 Deg.C
1762272606	33 Deg.C	2 %	32.1 Deg.C	32.1 Deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Usage: 0, 1, 0

Temp DS1: 0, 0.1, 0

Temp DS2: 0, 0.1, 0

Value5: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)