APRS Track Direct

My position About ☰

reset

HOLLY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HOLLY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786728178	13.8 Volt	510 Pkt	170 Pkt	60 Pcnt
1786727877	13.8 Volt	510 Pkt	160 Pkt	59 Pcnt
1786727577	13.8 Volt	500 Pkt	160 Pkt	59 Pcnt
1786727277	13.8 Volt	480 Pkt	150 Pkt	59 Pcnt
1786726976	13.8 Volt	450 Pkt	150 Pkt	59 Pcnt
1786726676	13.8 Volt	430 Pkt	140 Pkt	58 Pcnt
1786726376	13.8 Volt	440 Pkt	140 Pkt	58 Pcnt
1786726075	13.73 Volt	440 Pkt	130 Pkt	59 Pcnt
1786725775	13.73 Volt	440 Pkt	140 Pkt	59 Pcnt
1786725475	13.73 Volt	470 Pkt	150 Pkt	60 Pcnt
1786725174	13.5 Volt	470 Pkt	150 Pkt	60 Pcnt
1786724874	13.73 Volt	470 Pkt	150 Pkt	60 Pcnt
1786724574	13.73 Volt	490 Pkt	150 Pkt	60 Pcnt
1786724274	13.73 Volt	500 Pkt	150 Pkt	59 Pcnt
1786723973	13.43 Volt	510 Pkt	150 Pkt	60 Pcnt
1786723673	13.73 Volt	520 Pkt	150 Pkt	61 Pcnt
1786723373	12.3 Volt	550 Pkt	160 Pkt	61 Pcnt
1786723072	13.73 Volt	560 Pkt	160 Pkt	60 Pcnt
1786722772	12.3 Volt	570 Pkt	160 Pkt	60 Pcnt
1786722472	13.8 Volt	570 Pkt	160 Pkt	60 Pcnt
1786722172	13.8 Volt	560 Pkt	160 Pkt	60 Pcnt
1786721871	13.73 Volt	540 Pkt	150 Pkt	59 Pcnt
1786721571	13.8 Volt	550 Pkt	160 Pkt	60 Pcnt
1786721271	13.73 Volt	550 Pkt	160 Pkt	60 Pcnt
1786720970	13.8 Volt	540 Pkt	160 Pkt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp1: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)