This is the latest recevied telemetry packets stored in our database for station/object SM7UGO-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758215879 | 0 hPa | 16 C deg | 60.1 % | 0 hPa | 0 C deg |
| 1758214069 | 0 hPa | 15.9 C deg | 60.4 % | 0 hPa | 0 C deg |
| 1758212273 | 0 hPa | 17.1 C deg | 59.6 % | 0 hPa | 0 C deg |
| 1758210469 | 0 hPa | 18.4 C deg | 59.1 % | 0 hPa | 0 C deg |
| 1758205073 | 0 hPa | 24.2 C deg | 55.6 % | 0 hPa | 0 C deg |
| 1758201468 | 0 hPa | 24.9 C deg | 55 % | 0 hPa | 0 C deg |
| 1758199680 | 0 hPa | 23.8 C deg | 55.5 % | 0 hPa | 0 C deg |
| 1758190674 | 0 hPa | 16.2 C deg | 59.2 % | 0 hPa | 0 C deg |
| 1758188868 | 0 hPa | 16.8 C deg | 58.6 % | 0 hPa | 0 C deg |
| 1758183468 | 0 hPa | 14.9 C deg | 59.1 % | 0 hPa | 0 C deg |
| 1758181672 | 0 hPa | 13.9 C deg | 59.7 % | 0 hPa | 0 C deg |
| 1758174472 | 0 hPa | 11.8 C deg | 60.5 % | 0 hPa | 0 C deg |
| 1758170879 | 0 hPa | 10.8 C deg | 60.8 % | 0 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)