APRS Track Direct

My position About ☰

reset

IR2DD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2DD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1732286896	58 Pkt	410 Pkt	0.18 Pcnt	72 Pcnt
1732286596	63 Pkt	400 Pkt	0.18 Pcnt	72 Pcnt
1732286296	62 Pkt	410 Pkt	0.18 Pcnt	72 Pcnt
1732285996	62 Pkt	400 Pkt	0.18 Pcnt	72 Pcnt
1732285697	77 Pkt	400 Pkt	0.18 Pcnt	72 Pcnt
1732285396	68 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732285096	64 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732284797	67 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732284496	65 Pkt	380 Pkt	0.18 Pcnt	72 Pcnt
1732284196	51 Pkt	370 Pkt	0.18 Pcnt	72 Pcnt
1732283896	41 Pkt	380 Pkt	0.18 Pcnt	72 Pcnt
1732283596	51 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732283296	56 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732282996	55 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732282697	55 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732282396	59 Pkt	400 Pkt	0.18 Pcnt	72 Pcnt
1732282096	70 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732281797	63 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732281497	53 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732281197	59 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732280897	67 Pkt	390 Pkt	0.18 Pcnt	72 Pcnt
1732280597	56 Pkt	380 Pkt	0.18 Pcnt	72 Pcnt
1732280297	55 Pkt	370 Pkt	0.18 Pcnt	72 Pcnt
1732279997	59 Pkt	380 Pkt	0.18 Pcnt	72 Pcnt
1732279697	56 Pkt	360 Pkt	0.18 Pcnt	72 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)