This is the latest recevied telemetry packets stored in our database for station/object DL9MAC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1753644147 | 945 hPa | 23.5 C deg | 51.7 % | 1018.6 hPa | 0 C deg |
| 1753642347 | 944.8 hPa | 23.6 C deg | 51.4 % | 1018.4 hPa | 0 C deg |
| 1753640546 | 944.8 hPa | 23.7 C deg | 51.1 % | 1018.4 hPa | 0 C deg |
| 1753638746 | 945.1 hPa | 23.9 C deg | 50.9 % | 1018.6 hPa | 0 C deg |
| 1753636946 | 944.9 hPa | 24 C deg | 51.4 % | 1018.3 hPa | 0 C deg |
| 1753635145 | 944.3 hPa | 24 C deg | 50.5 % | 1017.7 hPa | 0 C deg |
| 1753633345 | 944.4 hPa | 24.1 C deg | 51.2 % | 1017.8 hPa | 0 C deg |
| 1753631545 | 944.4 hPa | 24.3 C deg | 51.7 % | 1017.7 hPa | 0 C deg |
| 1753629745 | 944.5 hPa | 24.4 C deg | 53 % | 1017.8 hPa | 0 C deg |
| 1753627945 | 944.8 hPa | 24.4 C deg | 53.2 % | 1018.2 hPa | 0 C deg |
| 1753626145 | 945.1 hPa | 24.5 C deg | 53 % | 1018.5 hPa | 0 C deg |
| 1753624345 | 945.3 hPa | 24.5 C deg | 53.1 % | 1018.6 hPa | 0 C deg |
| 1753622545 | 945.3 hPa | 24.5 C deg | 53.3 % | 1018.6 hPa | 0 C deg |
| 1753620745 | 945.2 hPa | 24.5 C deg | 53.2 % | 1018.6 hPa | 0 C deg |
| 1753618944 | 945.5 hPa | 24.5 C deg | 53.4 % | 1018.9 hPa | 0 C deg |
| 1753617144 | 945.7 hPa | 24.5 C deg | 52.7 % | 1019.1 hPa | 0 C deg |
| 1753615344 | 945.7 hPa | 24.4 C deg | 53.5 % | 1019.1 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)