APRS Track Direct

My position About ☰

reset

ON0ABT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0ABT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1754106580	14.48 Volt	360 Pkt	80 Pkt	92 Pcnt
1754105978	14.48 Volt	360 Pkt	80 Pkt	93 Pcnt
1754105380	14.55 Volt	350 Pkt	70 Pkt	93 Pcnt
1754104778	14.48 Volt	360 Pkt	80 Pkt	93 Pcnt
1754104178	14.48 Volt	350 Pkt	80 Pkt	93 Pcnt
1754103576	14.48 Volt	350 Pkt	70 Pkt	91 Pcnt
1754102976	14.03 Volt	350 Pkt	70 Pkt	90 Pcnt
1754102376	14.48 Volt	350 Pkt	70 Pkt	89 Pcnt
1754101776	14.48 Volt	360 Pkt	70 Pkt	89 Pcnt
1754101174	14.48 Volt	350 Pkt	70 Pkt	88 Pcnt
1754100574	14.48 Volt	350 Pkt	70 Pkt	87 Pcnt
1754099975	14.48 Volt	340 Pkt	70 Pkt	88 Pcnt
1754099373	14.48 Volt	350 Pkt	70 Pkt	89 Pcnt
1754098773	14.48 Volt	360 Pkt	70 Pkt	88 Pcnt
1754098171	14.48 Volt	360 Pkt	80 Pkt	89 Pcnt
1754097570	14.48 Volt	370 Pkt	80 Pkt	89 Pcnt
1754096971	14.48 Volt	380 Pkt	80 Pkt	89 Pcnt
1754096369	14.48 Volt	380 Pkt	80 Pkt	90 Pcnt
1754095769	14.48 Volt	390 Pkt	80 Pkt	90 Pcnt
1754095168	14.48 Volt	390 Pkt	80 Pkt	91 Pcnt
1754094567	14.48 Volt	380 Pkt	80 Pkt	91 Pcnt
1754093968	14.48 Volt	390 Pkt	80 Pkt	90 Pcnt
1754093367	14.48 Volt	390 Pkt	80 Pkt	91 Pcnt
1754092767	14.48 Volt	390 Pkt	80 Pkt	90 Pcnt
1754092169	14.48 Volt	380 Pkt	80 Pkt	89 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

None: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)