APRS Track Direct

My position About ☰

reset

DJ8HS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ8HS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Rx10m*	Eff1h*
1790648652	13.83 Volt	570 Pkt	930 Pkt	98 Pcnt
1790648352	13.83 Volt	570 Pkt	910 Pkt	97 Pcnt
1790648051	13.83 Volt	570 Pkt	960 Pkt	97 Pcnt
1790647751	13.83 Volt	580 Pkt	990 Pkt	97 Pcnt
1790647451	13.83 Volt	580 Pkt	850 Pkt	97 Pcnt
1790647150	13.83 Volt	580 Pkt	850 Pkt	97 Pcnt
1790646850	13.83 Volt	590 Pkt	970 Pkt	97 Pcnt
1790646550	13.83 Volt	600 Pkt	950 Pkt	97 Pcnt
1790646250	13.83 Volt	600 Pkt	960 Pkt	97 Pcnt
1790645949	13.83 Volt	610 Pkt	1060 Pkt	97 Pcnt
1790645649	13.83 Volt	610 Pkt	1010 Pkt	97 Pcnt
1790645349	13.83 Volt	600 Pkt	940 Pkt	97 Pcnt
1790645048	13.83 Volt	600 Pkt	940 Pkt	97 Pcnt
1790644748	13.83 Volt	610 Pkt	950 Pkt	97 Pcnt
1790644448	13.83 Volt	620 Pkt	1080 Pkt	97 Pcnt
1790644147	13.83 Volt	620 Pkt	990 Pkt	97 Pcnt
1790643547	13.83 Volt	620 Pkt	1050 Pkt	97 Pcnt
1790643247	13.83 Volt	610 Pkt	1070 Pkt	98 Pcnt
1790642946	13.83 Volt	610 Pkt	1070 Pkt	98 Pcnt
1790642646	13.83 Volt	600 Pkt	1070 Pkt	97 Pcnt
1790642346	13.83 Volt	590 Pkt	1000 Pkt	97 Pcnt
1790642046	13.83 Volt	590 Pkt	940 Pkt	97 Pcnt
1790641745	13.83 Volt	590 Pkt	990 Pkt	97 Pcnt
1790641445	13.83 Volt	590 Pkt	1160 Pkt	97 Pcnt
1790641145	13.83 Volt	570 Pkt	1130 Pkt	96 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Rx10m: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)