This is the latest recevied telemetry packets stored in our database for station/object BV5AB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | PM2.5* | PM10* | UV* | CO* | O3* |
|---|---|---|---|---|---|
| 1794919083 | 13 ug/m3 | 37 ug/m3 | 0 UVI | 0.68 ppm | 13 ppb |
| 1794918484 | 13 ug/m3 | 37 ug/m3 | 0 UVI | 0.68 ppm | 13 ppb |
| 1794917882 | 13 ug/m3 | 37 ug/m3 | 0 UVI | 0.68 ppm | 13 ppb |
| 1794917282 | 10 ug/m3 | 22 ug/m3 | 0 UVI | 0.5 ppm | 29 ppb |
| 1794916683 | 10 ug/m3 | 22 ug/m3 | 0 UVI | 0.5 ppm | 29 ppb |
| 1794916082 | 10 ug/m3 | 22 ug/m3 | 0 UVI | 0.5 ppm | 29 ppb |
| 1794915483 | 10 ug/m3 | 22 ug/m3 | 0 UVI | 0.5 ppm | 29 ppb |
| 1794914882 | 10 ug/m3 | 22 ug/m3 | 0 UVI | 0.5 ppm | 29 ppb |
| 1794914283 | 10 ug/m3 | 22 ug/m3 | 0 UVI | 0.5 ppm | 29 ppb |
| 1794913683 | 10 ug/m3 | 22 ug/m3 | 0 UVI | 0.5 ppm | 29 ppb |
| 1794913082 | 11 ug/m3 | 24 ug/m3 | 0 UVI | 0.33 ppm | 40 ppb |
| 1794912482 | 11 ug/m3 | 24 ug/m3 | 0 UVI | 0.33 ppm | 40 ppb |
| 1794911884 | 11 ug/m3 | 24 ug/m3 | 0 UVI | 0.33 ppm | 40 ppb |
| 1794911283 | 11 ug/m3 | 24 ug/m3 | 0 UVI | 0.33 ppm | 40 ppb |
| 1794910682 | 11 ug/m3 | 24 ug/m3 | 0 UVI | 0.33 ppm | 40 ppb |
*Used Equation Coefficients:
PM2.5: 0, 1, 0
PM10: 0, 1, 0
UV: 0, 1, 0
CO: 0, 0.01, 0
O3: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)