APRS Track Direct

My position About ☰

reset

VK2RGF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RGF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Battery*	Core*	Room*	Battery*	Tx*
1836274189	13.9 VDC	47.2 degC	24.2 degC	22.6 degC	40 pkts
1770177120	13.9 VDC	55.8 degC	33.5 degC	26.9 degC	40 pkts
1770173521	13.9 VDC	54.2 degC	32.9 degC	25.9 degC	35 pkts
1770169921	13.9 VDC	52.6 degC	30.8 degC	25 degC	31 pkts
1770166321	13.9 VDC	50.5 degC	28.2 degC	-72.9 degC	40 pkts
1770162721	13.9 VDC	48.9 degC	24.2 degC	24.2 degC	27 pkts
1770159121	13.9 VDC	48.3 degC	24.5 degC	23.9 degC	36 pkts
1770155524	13.9 VDC	47.8 degC	24.2 degC	-103.2 degC	55 pkts
1770151921	13.9 VDC	47.2 degC	23.8 degC	0 degC	27 pkts
1770148321	13.9 VDC	47.2 degC	23.5 degC	0 degC	28 pkts
1770141123	13.9 VDC	47.2 degC	23.4 degC	0 degC	26 pkts
1770130321	13.9 VDC	47.2 degC	23.9 degC	0 degC	28 pkts
1770126721	13.9 VDC	47.2 degC	23.6 degC	0 degC	27 pkts
1770123120	13.9 VDC	47.2 degC	23.3 degC	0 degC	27 pkts
1770119520	13.9 VDC	47.2 degC	23.6 degC	0 degC	26 pkts
1770115920	13.9 VDC	47.2 degC	23.8 degC	0 degC	34 pkts
1770112320	13.9 VDC	47.8 degC	23.6 degC	0 degC	24 pkts
1770108719	13.8 VDC	48.3 degC	23.9 degC	0 degC	28 pkts
1770105121	13.9 VDC	48.3 degC	24.6 degC	0 degC	31 pkts
1770101522	13.9 VDC	48.3 degC	25.2 degC	0 degC	27 pkts
1770097921	13.9 VDC	48.9 degC	25 degC	24.2 degC	26 pkts
1770094321	13.9 VDC	48.3 degC	25.6 degC	24.1 degC	37 pkts

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Core: 0, 0.1, 0

Room: 0, 0.1, 0

Battery: 0, 0.1, 0

Tx: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)