This is the latest recevied telemetry packets stored in our database for station/object OE1KFR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eCO2* | Temp.out* |
|---|---|---|---|---|---|
| 1836273870 | 985.9 hPa | 22 C deg | 59.6 % | 1478 ppm | 21.3 C deg |
| 1762342838 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.2 C deg |
| 1762313803 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.2 C deg |
| 1762311988 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.3 C deg |
| 1762310173 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.3 C deg |
| 1762308358 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.4 C deg |
| 1762306543 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.4 C deg |
| 1762304728 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.5 C deg |
| 1762302913 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.5 C deg |
| 1762301098 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.5 C deg |
| 1762299289 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.5 C deg |
| 1762292022 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.7 C deg |
| 1762290207 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.9 C deg |
| 1762288392 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.9 C deg |
| 1762286579 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 20 C deg |
| 1762284762 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 20.3 C deg |
| 1762282947 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 20.4 C deg |
| 1762281133 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 20.5 C deg |
| 1762277502 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 20.9 C deg |
| 1762264791 | 975.6 hPa | 21.5 C deg | 67 % | 400 ppm | 19.3 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eCO2: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)