APRS Track Direct

My position About ☰

reset

NE1CU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NE1CU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Temp*	Rx1h*	Dg1h*
1732273573	12.68 Volt	65.9 DegF	20 Pkt	0 Pkt
1732272673	12.9 Volt	65.9 DegF	10 Pkt	0 Pkt
1732271773	13.13 Volt	65.9 DegF	20 Pkt	0 Pkt
1732270873	13.28 Volt	65.9 DegF	20 Pkt	0 Pkt
1732269973	12.68 Volt	65.9 DegF	40 Pkt	0 Pkt
1732269073	12.75 Volt	65.9 DegF	60 Pkt	0 Pkt
1732268173	12.98 Volt	65.9 DegF	70 Pkt	0 Pkt
1732267273	13.35 Volt	65.9 DegF	90 Pkt	0 Pkt
1732266373	13.05 Volt	66.8 DegF	90 Pkt	0 Pkt
1732265473	12.68 Volt	65.9 DegF	100 Pkt	0 Pkt
1732264573	13.35 Volt	65.9 DegF	110 Pkt	10 Pkt
1732263673	12.83 Volt	66.8 DegF	110 Pkt	10 Pkt
1732262773	13.28 Volt	66.8 DegF	120 Pkt	20 Pkt
1732261873	13.05 Volt	66.8 DegF	120 Pkt	20 Pkt
1732260974	12.68 Volt	66.8 DegF	110 Pkt	10 Pkt
1732260074	13.73 Volt	66.8 DegF	110 Pkt	10 Pkt
1732259174	12.83 Volt	66.8 DegF	100 Pkt	10 Pkt
1732258274	12.75 Volt	66.8 DegF	100 Pkt	10 Pkt
1732257374	12.98 Volt	66.8 DegF	90 Pkt	10 Pkt
1732256474	12.75 Volt	66.8 DegF	90 Pkt	10 Pkt
1732255574	13.43 Volt	66.8 DegF	90 Pkt	10 Pkt
1732254674	12.83 Volt	66.8 DegF	70 Pkt	10 Pkt
1732253774	13.35 Volt	66.8 DegF	60 Pkt	10 Pkt
1732252874	13.13 Volt	66.8 DegF	50 Pkt	10 Pkt
1732251974	12.6 Volt	66.8 DegF	30 Pkt	10 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.9, -97

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)