This is the latest recevied telemetry packets stored in our database for station/object W0CHP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU Load* | CPU Temp* | Free Mem* | RX Packets* | TX Packets* |
|---|---|---|---|---|---|
| 1732255453 | 22.2 % | 121.58 DegF | 72 MB | 115640 Pkts | 136110 Pkts |
| 1732254630 | 22.2 % | 120.61 DegF | 75 MB | 115470 Pkts | 135660 Pkts |
| 1732253805 | 26.3 % | 121.58 DegF | 81 MB | 115210 Pkts | 135750 Pkts |
| 1732252973 | 25 % | 122.55 DegF | 83 MB | 116610 Pkts | 136000 Pkts |
| 1732252105 | 52.2 % | 122.55 DegF | 78 MB | 114190 Pkts | 135900 Pkts |
| 1732251325 | 52.2 % | 121.58 DegF | 28 MB | 114370 Pkts | 135820 Pkts |
| 1732250495 | 26.3 % | 121.58 DegF | 31 MB | 113900 Pkts | 135810 Pkts |
| 1732249665 | 21.1 % | 122.55 DegF | 36 MB | 116030 Pkts | 135890 Pkts |
| 1732248005 | 47.6 % | 121.58 DegF | 40 MB | 114570 Pkts | 136120 Pkts |
| 1732247165 | 25 % | 121.58 DegF | 40 MB | 116610 Pkts | 135730 Pkts |
| 1732246400 | 25 % | 122.55 DegF | 39 MB | 117620 Pkts | 136400 Pkts |
| 1732245610 | 47.6 % | 120.61 DegF | 39 MB | 116670 Pkts | 135780 Pkts |
| 1732244799 | 25 % | 120.61 DegF | 33 MB | 116200 Pkts | 136420 Pkts |
| 1732243965 | 52.2 % | 121.58 DegF | 41 MB | 115150 Pkts | 135720 Pkts |
| 1732243165 | 36.4 % | 122.55 DegF | 36 MB | 115220 Pkts | 136000 Pkts |
*Used Equation Coefficients:
CPU Load: 0, 1, 0
CPU Temp: 0, 1, 0
Free Mem: 0, 1, 0
RX Packets: 0, 1, 0
TX Packets: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)