This is the latest recevied telemetry packets stored in our database for station/object DG5TS-99. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758215909 | 1009.9 hPa | 28.4 C deg | 37.4 % | 1021.4 hPa | 0 C deg |
| 1758214109 | 1009.5 hPa | 28.7 C deg | 36.9 % | 1021 hPa | 0 C deg |
| 1758212308 | 1009.3 hPa | 29.2 C deg | 36.2 % | 1020.8 hPa | 0 C deg |
| 1758210508 | 1009.2 hPa | 29.5 C deg | 35.6 % | 1020.6 hPa | 0 C deg |
| 1758208708 | 1008.9 hPa | 29.6 C deg | 35.4 % | 1020.3 hPa | 0 C deg |
| 1758206908 | 1008.9 hPa | 30.5 C deg | 34.3 % | 1020.3 hPa | 0 C deg |
| 1758205108 | 1009.1 hPa | 29.9 C deg | 35.7 % | 1020.5 hPa | 0 C deg |
| 1758203308 | 1009.2 hPa | 29.9 C deg | 35.7 % | 1020.6 hPa | 0 C deg |
| 1758172705 | 1007.2 hPa | 24 C deg | 39.9 % | 1018.8 hPa | 0 C deg |
| 1758170905 | 1007 hPa | 24 C deg | 39.6 % | 1018.6 hPa | 0 C deg |
| 1758136703 | 1008.4 hPa | 24.6 C deg | 33 % | 1020 hPa | 0 C deg |
| 1758134903 | 1008.5 hPa | 25.1 C deg | 32.1 % | 1020.1 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)