This is the latest recevied telemetry packets stored in our database for station/object OE3RCB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1836274697 | 1002.4 hPa | 18.5 C deg | 59.1 % | 1026.2 hPa | 0 C deg |
| 1766197220 | 1002.9 hPa | 6 C deg | 71 % | 1027.9 hPa | 0 C deg |
| 1766190020 | 1003.1 hPa | 6.1 C deg | 71.2 % | 1028 hPa | 0 C deg |
| 1766182827 | 1004.1 hPa | 6.2 C deg | 71.1 % | 1029.1 hPa | 0 C deg |
| 1766181026 | 1004.2 hPa | 6.2 C deg | 71.3 % | 1029.2 hPa | 0 C deg |
| 1766175619 | 1004.6 hPa | 6.2 C deg | 71.3 % | 1029.5 hPa | 0 C deg |
| 1766172022 | 1004.8 hPa | 6.3 C deg | 71.5 % | 1029.8 hPa | 0 C deg |
| 1766168437 | 1004.9 hPa | 6.3 C deg | 71.5 % | 1029.8 hPa | 0 C deg |
| 1766164821 | 1005 hPa | 6.3 C deg | 71.5 % | 1030 hPa | 0 C deg |
| 1766163018 | 1005.1 hPa | 6.3 C deg | 71.5 % | 1030 hPa | 0 C deg |
| 1766159420 | 1005 hPa | 6.4 C deg | 71.6 % | 1030 hPa | 0 C deg |
| 1766150418 | 1004.6 hPa | 6.5 C deg | 71.7 % | 1029.6 hPa | 0 C deg |
| 1766146819 | 1004.8 hPa | 6.4 C deg | 71.6 % | 1029.7 hPa | 0 C deg |
| 1766143240 | 1005 hPa | 6.4 C deg | 71.5 % | 1029.9 hPa | 0 C deg |
| 1766134217 | 1005.7 hPa | 6 C deg | 71.7 % | 1030.7 hPa | 0 C deg |
| 1766127017 | 1005.2 hPa | 5.9 C deg | 71.7 % | 1030.2 hPa | 0 C deg |
| 1766125217 | 1004.9 hPa | 5.9 C deg | 71.9 % | 1029.9 hPa | 0 C deg |
| 1766123417 | 1004.8 hPa | 5.9 C deg | 71.6 % | 1029.8 hPa | 0 C deg |
| 1766121616 | 1004.6 hPa | 5.9 C deg | 71.6 % | 1029.6 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)