This is the latest recevied telemetry packets stored in our database for station/object OE3YCB-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1836274326 | 988.5 hPa | 20.2 C deg | 60.1 % | 1024.5 hPa | 22.4 C deg |
| 1766329010 | 981.9 hPa | 7.3 C deg | 65.9 % | 1019.3 hPa | 7.9 C deg |
| 1766323565 | 982 hPa | 7.4 C deg | 66 % | 1019.4 hPa | 7.9 C deg |
| 1766321750 | 982 hPa | 7.6 C deg | 65.8 % | 1019.4 hPa | 7.9 C deg |
| 1766319935 | 982.2 hPa | 7.8 C deg | 65.1 % | 1019.6 hPa | 7.9 C deg |
| 1766312675 | 982.9 hPa | 8.6 C deg | 61.4 % | 1020.1 hPa | 7.9 C deg |
| 1766309045 | 983.4 hPa | 8.2 C deg | 61.9 % | 1020.7 hPa | 7.9 C deg |
| 1766287263 | 983.4 hPa | 7.1 C deg | 66.5 % | 1020.9 hPa | 7.9 C deg |
| 1766283636 | 983.5 hPa | 7.1 C deg | 66.5 % | 1021 hPa | 7.9 C deg |
| 1766281819 | 983.7 hPa | 7.2 C deg | 66.5 % | 1021.1 hPa | 7.9 C deg |
| 1766265483 | 984.1 hPa | 7.7 C deg | 66.6 % | 1021.5 hPa | 7.9 C deg |
| 1766247332 | 984.3 hPa | 9.4 C deg | 63.1 % | 1021.5 hPa | 7.9 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)