APRS Track Direct

My position About ☰

reset

WC4PEM-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1836274792	25.5 C	14.25 Volt	280 Pkt	1010 Pkt	76 Pcnt
1836274492	25.5 C	14.33 Volt	280 Pkt	1010 Pkt	76 Pcnt
1836274342	26 C	14.18 Volt	280 Pkt	1000 Pkt	76 Pcnt
1836274192	26 C	14.25 Volt	280 Pkt	1010 Pkt	75 Pcnt
1836273892	25.5 C	14.25 Volt	270 Pkt	1030 Pkt	75 Pcnt
1762314807	26 C	14.25 Volt	280 Pkt	850 Pkt	78 Pcnt
1762314806	26 C	14.25 Volt	280 Pkt	850 Pkt	78 Pcnt
1762314506	25.5 C	14.33 Volt	280 Pkt	830 Pkt	78 Pcnt
1762314206	26 C	14.25 Volt	280 Pkt	840 Pkt	78 Pcnt
1762313906	25.5 C	14.33 Volt	280 Pkt	850 Pkt	78 Pcnt
1762313607	25.5 C	14.25 Volt	270 Pkt	830 Pkt	78 Pcnt
1762313606	25.5 C	14.25 Volt	270 Pkt	830 Pkt	78 Pcnt
1762313306	25.5 C	14.18 Volt	270 Pkt	820 Pkt	77 Pcnt
1762313006	25.5 C	14.25 Volt	270 Pkt	820 Pkt	76 Pcnt
1762312706	25.5 C	14.33 Volt	280 Pkt	820 Pkt	76 Pcnt
1762312407	25.5 C	14.1 Volt	280 Pkt	820 Pkt	76 Pcnt
1762312406	25.5 C	14.1 Volt	280 Pkt	820 Pkt	76 Pcnt
1762312106	25.5 C	14.33 Volt	280 Pkt	830 Pkt	76 Pcnt
1762311807	25.5 C	14.18 Volt	290 Pkt	830 Pkt	74 Pcnt
1762311806	25.5 C	14.18 Volt	290 Pkt	830 Pkt	74 Pcnt
1762311506	26 C	14.33 Volt	290 Pkt	840 Pkt	75 Pcnt
1762311208	25 C	14.33 Volt	290 Pkt	860 Pkt	75 Pcnt
1762311206	25 C	14.33 Volt	290 Pkt	860 Pkt	75 Pcnt
1762310906	26 C	14.33 Volt	290 Pkt	870 Pkt	74 Pcnt
1762310606	25.5 C	14.25 Volt	300 Pkt	890 Pkt	74 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)