This is the latest recevied telemetry packets stored in our database for station/object WA7DRE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V-Input* | Rx1h* | Dg1h* | Eff1h* | Value5* |
|---|---|---|---|---|---|
| 1836274826 | 14.18 Volt | 0 Pkt | 0 Pkt | 0 % | 0 |
| 1770142705 | 14.18 Volt | 80 Pkt | 0 Pkt | 83 % | 0 |
| 1770140905 | 14.18 Volt | 70 Pkt | 0 Pkt | 82 % | 0 |
| 1770139105 | 14.18 Volt | 50 Pkt | 0 Pkt | 82 % | 0 |
| 1770137305 | 14.1 Volt | 60 Pkt | 0 Pkt | 83 % | 0 |
| 1770135505 | 14.1 Volt | 70 Pkt | 0 Pkt | 83 % | 0 |
| 1770133705 | 14.18 Volt | 50 Pkt | 0 Pkt | 85 % | 0 |
| 1770131905 | 14.1 Volt | 50 Pkt | 0 Pkt | 87 % | 0 |
| 1770130105 | 14.1 Volt | 60 Pkt | 0 Pkt | 72 % | 0 |
| 1770128305 | 14.1 Volt | 60 Pkt | 0 Pkt | 63 % | 0 |
| 1770126505 | 14.1 Volt | 50 Pkt | 0 Pkt | 65 % | 0 |
| 1770124705 | 14.1 Volt | 50 Pkt | 0 Pkt | 77 % | 0 |
| 1770122905 | 14.1 Volt | 50 Pkt | 0 Pkt | 85 % | 0 |
| 1770121105 | 14.1 Volt | 40 Pkt | 0 Pkt | 86 % | 0 |
| 1770119305 | 14.18 Volt | 40 Pkt | 0 Pkt | 83 % | 0 |
| 1770117505 | 14.18 Volt | 50 Pkt | 0 Pkt | 87 % | 0 |
| 1770115705 | 14.18 Volt | 40 Pkt | 0 Pkt | 88 % | 0 |
| 1770113905 | 14.1 Volt | 40 Pkt | 0 Pkt | 85 % | 0 |
| 1770112105 | 14.18 Volt | 40 Pkt | 0 Pkt | 88 % | 0 |
| 1770110305 | 14.18 Volt | 40 Pkt | 0 Pkt | 84 % | 0 |
| 1770108505 | 14.18 Volt | 50 Pkt | 0 Pkt | 84 % | 0 |
| 1770106705 | 14.1 Volt | 50 Pkt | 0 Pkt | 82 % | 0 |
| 1770104905 | 14.1 Volt | 60 Pkt | 0 Pkt | 83 % | 0 |
| 1770103105 | 14.18 Volt | 50 Pkt | 0 Pkt | 76 % | 0 |
| 1770101305 | 14.1 Volt | 40 Pkt | 0 Pkt | 70 % | 0 |
*Used Equation Coefficients:
V-Input: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)