This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-NK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Baro* | Power* | RSSI* | Load* |
|---|---|---|---|---|---|
| 1836274642 | 26.5 C | 950 mbar | 0 W | -90 dBm | 8.8 % |
| 1836274282 | 26.5 C | 950 mbar | 0 W | -89 dBm | 8.8 % |
| 1836273922 | 26.5 C | 950 mbar | 0 W | -88 dBm | 9.2 % |
| 1782502134 | 30 C | 950 mbar | 300 W | -81 dBm | 8.8 % |
| 1782501774 | 30 C | 950 mbar | 280 W | -81 dBm | 9.2 % |
| 1782501413 | 30 C | 950 mbar | 400 W | -81 dBm | 9.2 % |
| 1782501053 | 30 C | 950 mbar | 400 W | -81 dBm | 8.4 % |
| 1782500694 | 30 C | 950 mbar | 380 W | -81 dBm | 8.8 % |
| 1782499974 | 30 C | 950 mbar | 320 W | -81 dBm | 9.2 % |
| 1782499613 | 30 C | 950 mbar | 320 W | -81 dBm | 9.2 % |
| 1782499254 | 30 C | 950 mbar | 300 W | -82 dBm | 9.2 % |
| 1782498893 | 30 C | 950 mbar | 400 W | -80 dBm | 8.8 % |
| 1782498534 | 30 C | 950 mbar | 400 W | -80 dBm | 8.8 % |
| 1782498173 | 30 C | 950 mbar | 380 W | -81 dBm | 9.2 % |
| 1782497813 | 30 C | 950 mbar | 380 W | -81 dBm | 8.8 % |
| 1782497453 | 30 C | 950 mbar | 400 W | -80 dBm | 8.8 % |
| 1782497093 | 30 C | 950 mbar | 300 W | -80 dBm | 8.4 % |
| 1782496734 | 30 C | 950 mbar | 300 W | -81 dBm | 8.4 % |
| 1782496374 | 30.5 C | 950 mbar | 280 W | -80 dBm | 9.2 % |
| 1782496014 | 30 C | 950 mbar | 360 W | -80 dBm | 9.2 % |
| 1782495654 | 30 C | 950 mbar | 280 W | -81 dBm | 8.8 % |
| 1782495293 | 30.5 C | 950 mbar | 340 W | -80 dBm | 8.4 % |
| 1782494934 | 30 C | 950 mbar | 460 W | -81 dBm | 8.4 % |
| 1782494573 | 30.5 C | 950 mbar | 320 W | -80 dBm | 8.4 % |
| 1782494214 | 30 C | 950 mbar | 280 W | -82 dBm | 9.2 % |
*Used Equation Coefficients:
Temp: 0, 0.5, -25
Baro: 0, 0.4, 950
Power: 0, 20, 0
RSSI: 0, -1, 0
Load: 0, 0.4, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)