APRS Track Direct

My position About ☰

reset

TB2TII-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB2TII-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1750147071	56 Pkt	129 Pkt	9 Pkt	-51 dBm	0.25 V
1750146126	51 Pkt	152 Pkt	8 Pkt	-52 dBm	0.39 V
1750145183	48 Pkt	146 Pkt	10 Pkt	-50 dBm	0.39 V
1750144242	51 Pkt	164 Pkt	7 Pkt	-51 dBm	0.39 V
1750143299	71 Pkt	112 Pkt	14 Pkt	-50 dBm	0.39 V
1750142352	58 Pkt	127 Pkt	15 Pkt	-50 dBm	0.21 V
1750141408	71 Pkt	96 Pkt	16 Pkt	-50 dBm	0.39 V
1750140463	58 Pkt	128 Pkt	15 Pkt	-52 dBm	0.37 V
1750139522	74 Pkt	100 Pkt	14 Pkt	-51 dBm	0.21 V
1750138572	61 Pkt	109 Pkt	17 Pkt	-48 dBm	0.39 V
1750136697	10 Pkt	14 Pkt	1 Pkt	-46 dBm	0.25 V
1750136116	62 Pkt	121 Pkt	11 Pkt	-43 dBm	0.25 V
1750135168	66 Pkt	117 Pkt	11 Pkt	-43 dBm	0.39 V
1750134223	79 Pkt	95 Pkt	11 Pkt	-43 dBm	0.39 V
1750133278	74 Pkt	103 Pkt	10 Pkt	-43 dBm	0.25 V
1750132328	59 Pkt	106 Pkt	9 Pkt	-44 dBm	0.39 V
1750131381	64 Pkt	118 Pkt	8 Pkt	-43 dBm	0.25 V
1750130435	66 Pkt	114 Pkt	11 Pkt	-42 dBm	0.39 V
1750129495	59 Pkt	106 Pkt	14 Pkt	-42 dBm	0.25 V
1750128553	78 Pkt	100 Pkt	18 Pkt	-42 dBm	0.25 V
1750127601	55 Pkt	98 Pkt	10 Pkt	-43 dBm	0.39 V
1750126661	86 Pkt	92 Pkt	9 Pkt	-43 dBm	0.39 V
1750125709	63 Pkt	88 Pkt	6 Pkt	-41 dBm	0.39 V
1750124768	91 Pkt	83 Pkt	6 Pkt	-42 dBm	0.25 V
1750123818	72 Pkt	83 Pkt	9 Pkt	-42 dBm	0.25 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)