This is the latest recevied telemetry packets stored in our database for station/object EA5SW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758208229 | 0 Count | 124 Count | 0 Count | 0 VDC | 0 VDC |
| 1758206009 | 0 Count | 1073 Count | 0 Count | 0 VDC | 0 VDC |
| 1758203788 | 0 Count | 959 Count | 0 Count | 0 VDC | 0 VDC |
| 1758201568 | 0 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1758199348 | 0 Count | 831 Count | 0 Count | 0 VDC | 0 VDC |
| 1758197736 | 0 Count | 788 Count | 0 Count | 0 VDC | 0 VDC |
| 1758195516 | 0 Count | 696 Count | 0 Count | 0 VDC | 0 VDC |
| 1758193296 | 0 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1758191076 | 0 Count | 563 Count | 0 Count | 0 VDC | 0 VDC |
| 1758188856 | 0 Count | 495 Count | 0 Count | 0 VDC | 0 VDC |
| 1758186635 | 0 Count | 427 Count | 0 Count | 0 VDC | 0 VDC |
| 1758184415 | 0 Count | 317 Count | 0 Count | 0 VDC | 0 VDC |
| 1758182195 | 0 Count | 239 Count | 0 Count | 0 VDC | 0 VDC |
| 1758179975 | 0 Count | 160 Count | 0 Count | 0 VDC | 0 VDC |
| 1758177755 | 0 Count | 91 Count | 0 Count | 0 VDC | 0 VDC |
| 1758176965 | 0 Count | 61 Count | 0 Count | 0 VDC | 0 VDC |
| 1758175348 | 0 Count | 1039 Count | 0 Count | 0 VDC | 0 VDC |
| 1758173128 | 0 Count | 927 Count | 0 Count | 0 VDC | 0 VDC |
| 1758170908 | 0 Count | 875 Count | 0 Count | 0 VDC | 0 VDC |
| 1758168688 | 0 Count | 810 Count | 0 Count | 0 VDC | 0 VDC |
| 1758166468 | 0 Count | 767 Count | 0 Count | 0 VDC | 0 VDC |
| 1758164248 | 0 Count | 706 Count | 0 Count | 0 VDC | 0 VDC |
| 1758162028 | 0 Count | 653 Count | 0 Count | 0 VDC | 0 VDC |
| 1758159808 | 0 Count | 604 Count | 0 Count | 0 VDC | 0 VDC |
| 1758157587 | 0 Count | 553 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)