This is the latest recevied telemetry packets stored in our database for station/object WB4BOR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Phone Battery* | GPS Accuracy* | TX Packets* | RX Packets* | Session Uptime* |
|---|---|---|---|---|---|
| 1790654194 | 100 % | 5 m | 172 cnt | 207 cnt | 294 min |
| 1790653594 | 100 % | 6 m | 160 cnt | 195 cnt | 288 min |
| 1790652994 | 100 % | 6 m | 148 cnt | 160 cnt | 276 min |
| 1790652394 | 100 % | 6 m | 133 cnt | 146 cnt | 264 min |
| 1790651794 | 100 % | 6 m | 121 cnt | 113 cnt | 258 min |
| 1790651194 | 100 % | 6 m | 109 cnt | 88 cnt | 246 min |
| 1790650594 | 100 % | 6 m | 94 cnt | 46 cnt | 234 min |
| 1790649994 | 100 % | 5 m | 82 cnt | 33 cnt | 228 min |
| 1790649394 | 100 % | 5 m | 70 cnt | 7 cnt | 216 min |
| 1790648794 | 100 % | 6 m | 55 cnt | 249 cnt | 204 min |
| 1790648194 | 100 % | 6 m | 43 cnt | 233 cnt | 198 min |
| 1790647594 | 100 % | 5 m | 31 cnt | 214 cnt | 186 min |
| 1790646994 | 100 % | 6 m | 16 cnt | 195 cnt | 174 min |
| 1790646394 | 100 % | 5 m | 4 cnt | 182 cnt | 168 min |
| 1790645794 | 100 % | 5 m | 248 cnt | 162 cnt | 156 min |
| 1790645194 | 100 % | 6 m | 233 cnt | 140 cnt | 144 min |
| 1790644594 | 100 % | 5 m | 221 cnt | 126 cnt | 138 min |
| 1790643994 | 100 % | 6 m | 209 cnt | 105 cnt | 126 min |
| 1790643394 | 100 % | 7 m | 194 cnt | 74 cnt | 114 min |
| 1790642794 | 100 % | 5 m | 182 cnt | 61 cnt | 108 min |
| 1790642194 | 100 % | 6 m | 167 cnt | 21 cnt | 96 min |
| 1790641594 | 100 % | 5 m | 152 cnt | 248 cnt | 84 min |
| 1790640994 | 100 % | 5 m | 137 cnt | 223 cnt | 78 min |
| 1790640394 | 100 % | 5 m | 125 cnt | 164 cnt | 66 min |
| 1790639794 | 100 % | 6 m | 110 cnt | 140 cnt | 54 min |
*Used Equation Coefficients:
Phone Battery: 0, 1, 0
GPS Accuracy: 0, 1, 0
TX Packets: 0, 1, 0
RX Packets: 0, 1, 0
Session Uptime: 0, 6, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)