APRS Track Direct

My position About ☰

reset

N1DTA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1DTA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1758183627	15.6 Volt	810 Pkt	280 Pkt	67 Pcnt
1758183626	15.6 Volt	810 Pkt	280 Pkt	67 Pcnt
1758183326	15.75 Volt	800 Pkt	270 Pkt	66 Pcnt
1758183027	15.68 Volt	800 Pkt	270 Pkt	67 Pcnt
1758183026	15.68 Volt	800 Pkt	270 Pkt	67 Pcnt
1758182726	15.6 Volt	800 Pkt	270 Pkt	67 Pcnt
1758182427	15.83 Volt	780 Pkt	270 Pkt	66 Pcnt
1758182426	15.83 Volt	780 Pkt	270 Pkt	66 Pcnt
1758182126	15.68 Volt	760 Pkt	260 Pkt	66 Pcnt
1758181827	15.68 Volt	770 Pkt	270 Pkt	66 Pcnt
1758181826	15.68 Volt	770 Pkt	270 Pkt	66 Pcnt
1758181526	15.68 Volt	750 Pkt	270 Pkt	67 Pcnt
1758181229	15.75 Volt	750 Pkt	270 Pkt	67 Pcnt
1758181226	15.75 Volt	750 Pkt	270 Pkt	67 Pcnt
1758180926	15.6 Volt	760 Pkt	280 Pkt	67 Pcnt
1758180627	15.83 Volt	780 Pkt	280 Pkt	68 Pcnt
1758180626	15.83 Volt	780 Pkt	280 Pkt	68 Pcnt
1758180326	15.6 Volt	780 Pkt	280 Pkt	69 Pcnt
1758180027	15.68 Volt	790 Pkt	290 Pkt	70 Pcnt
1758180026	15.68 Volt	790 Pkt	290 Pkt	70 Pcnt
1758179726	15.75 Volt	800 Pkt	290 Pkt	71 Pcnt
1758179427	15.75 Volt	800 Pkt	290 Pkt	71 Pcnt
1758179426	15.75 Volt	800 Pkt	290 Pkt	71 Pcnt
1758179126	15.68 Volt	800 Pkt	280 Pkt	71 Pcnt
1758178827	15.6 Volt	830 Pkt	290 Pkt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)