APRS Track Direct

My position About ☰

reset

E25HA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E25HA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1754107575	4 ug/m3	2 ug/m3	2 ug/m3	-45 dBm	14.46 V
1754107252	4 ug/m3	2 ug/m3	2 ug/m3	-42 dBm	14.17 V
1754106930	4 ug/m3	2 ug/m3	2 ug/m3	-42 dBm	14.15 V
1754106608	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.38 V
1754106285	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.38 V
1754105963	4 ug/m3	2 ug/m3	2 ug/m3	-44 dBm	14.17 V
1754105640	4 ug/m3	2 ug/m3	2 ug/m3	-44 dBm	14.38 V
1754105318	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.38 V
1754104996	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.48 V
1754104673	4 ug/m3	2 ug/m3	2 ug/m3	-44 dBm	14.46 V
1754104351	4 ug/m3	2 ug/m3	2 ug/m3	-45 dBm	14.44 V
1754104028	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.21 V
1754103706	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.46 V
1754103384	4 ug/m3	2 ug/m3	2 ug/m3	-46 dBm	14.46 V
1754103061	4 ug/m3	2 ug/m3	2 ug/m3	-44 dBm	14.4 V
1754102739	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.46 V
1754102417	4 ug/m3	2 ug/m3	2 ug/m3	-42 dBm	14.4 V
1754102094	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.42 V
1754101772	4 ug/m3	2 ug/m3	2 ug/m3	-42 dBm	14.46 V
1754101450	4 ug/m3	2 ug/m3	2 ug/m3	-42 dBm	14.23 V
1754101127	4 ug/m3	2 ug/m3	2 ug/m3	-41 dBm	14.46 V
1754100805	4 ug/m3	2 ug/m3	2 ug/m3	-42 dBm	14.46 V
1754100482	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.46 V
1754100160	4 ug/m3	2 ug/m3	2 ug/m3	-42 dBm	14.38 V
1754099838	4 ug/m3	2 ug/m3	2 ug/m3	-43 dBm	14.17 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)