APRS Track Direct

My position About ☰

reset

IQ4SC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ4SC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff1h*
1790646476	137 Pkt	800 Pkt	0.63 Pcnt	62 Pcnt
1790646176	129 Pkt	800 Pkt	0.63 Pcnt	61 Pcnt
1790645875	133 Pkt	820 Pkt	0.63 Pcnt	62 Pcnt
1790645575	133 Pkt	840 Pkt	0.63 Pcnt	62 Pcnt
1790645275	114 Pkt	840 Pkt	0.63 Pcnt	62 Pcnt
1790644974	139 Pkt	860 Pkt	0.63 Pcnt	64 Pcnt
1790644674	127 Pkt	870 Pkt	0.63 Pcnt	64 Pcnt
1790644374	110 Pkt	860 Pkt	0.63 Pcnt	64 Pcnt
1790644074	117 Pkt	880 Pkt	0.63 Pcnt	64 Pcnt
1790643773	114 Pkt	890 Pkt	0.63 Pcnt	64 Pcnt
1790643473	113 Pkt	900 Pkt	0.63 Pcnt	65 Pcnt
1790643173	133 Pkt	910 Pkt	0.63 Pcnt	65 Pcnt
1790642872	159 Pkt	920 Pkt	0.63 Pcnt	66 Pcnt
1790642572	161 Pkt	900 Pkt	0.63 Pcnt	65 Pcnt
1790642272	156 Pkt	850 Pkt	0.63 Pcnt	64 Pcnt
1790641972	160 Pkt	830 Pkt	0.63 Pcnt	63 Pcnt
1790641671	144 Pkt	800 Pkt	0.63 Pcnt	61 Pcnt
1790641371	133 Pkt	760 Pkt	0.63 Pcnt	58 Pcnt
1790641071	135 Pkt	730 Pkt	0.63 Pcnt	57 Pcnt
1790640770	136 Pkt	720 Pkt	0.63 Pcnt	55 Pcnt
1790640470	123 Pkt	670 Pkt	0.63 Pcnt	53 Pcnt
1790640170	142 Pkt	660 Pkt	0.63 Pcnt	53 Pcnt
1790639870	133 Pkt	640 Pkt	0.63 Pcnt	53 Pcnt
1790639569	116 Pkt	610 Pkt	0.63 Pcnt	52 Pcnt
1790639269	97 Pkt	590 Pkt	0.63 Pcnt	51 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)