This is the latest recevied telemetry packets stored in our database for station/object PP5CRE-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274354 | 17 | 75 | 15 | 3 | 76 |
| 1836274226 | 17 | 77 | 15 | 3 | 76 |
| 1766248140 | 19 | 94 | 228 | 3 | 76 |
| 1766247260 | 19 | 94 | 228 | 3 | 76 |
| 1766246379 | 19 | 94 | 228 | 3 | 76 |
| 1766245498 | 18 | 94 | 228 | 3 | 76 |
| 1766244617 | 18 | 94 | 228 | 3 | 76 |
| 1766243736 | 18 | 94 | 228 | 3 | 76 |
| 1766242855 | 18 | 96 | 228 | 3 | 76 |
| 1766241974 | 18 | 96 | 228 | 3 | 76 |
| 1766241093 | 18 | 95 | 228 | 3 | 76 |
| 1766240213 | 17 | 96 | 228 | 3 | 76 |
| 1766239333 | 17 | 95 | 228 | 3 | 76 |
| 1766238454 | 17 | 93 | 228 | 3 | 76 |
| 1766237574 | 17 | 95 | 228 | 2 | 76 |
| 1766236688 | 17 | 93 | 227 | 3 | 76 |
| 1766235806 | 17 | 96 | 227 | 3 | 76 |
| 1766234925 | 16 | 96 | 227 | 3 | 76 |
| 1766234043 | 16 | 96 | 227 | 3 | 76 |
| 1766233162 | 16 | 96 | 227 | 3 | 76 |
| 1766232282 | 16 | 94 | 227 | 3 | 76 |
| 1766231402 | 16 | 94 | 227 | 3 | 76 |
| 1766230521 | 16 | 93 | 227 | 3 | 76 |
| 1766229640 | 16 | 93 | 227 | 3 | 76 |
| 1766228760 | 16 | 93 | 227 | 1 | 76 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)