APRS Track Direct

My position About ☰

reset

DM2HB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM2HB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Dg1h*	Rx1h*	Effall*	Vin*	Temp*
1836273883	20 Pkt	290 Pkt	62 Pcnt	11.91 Volt	36 C
1762263139	0 Pkt	170 Pkt	62 Pcnt	11.99 Volt	28.5 C
1762259541	10 Pkt	210 Pkt	62 Pcnt	11.99 Volt	28 C
1762255942	0 Pkt	170 Pkt	62 Pcnt	11.99 Volt	28 C
1762252341	10 Pkt	210 Pkt	62 Pcnt	11.99 Volt	28 C
1762248739	10 Pkt	190 Pkt	62 Pcnt	11.99 Volt	27.5 C
1762245140	0 Pkt	190 Pkt	62 Pcnt	11.99 Volt	27.5 C
1762241541	10 Pkt	220 Pkt	62 Pcnt	11.91 Volt	27.5 C
1762237940	10 Pkt	200 Pkt	62 Pcnt	11.47 Volt	27.5 C
1762234340	10 Pkt	180 Pkt	62 Pcnt	11.99 Volt	27.5 C
1762230744	0 Pkt	130 Pkt	62 Pcnt	11.99 Volt	27.5 C
1762227140	0 Pkt	150 Pkt	62 Pcnt	11.99 Volt	27.5 C
1762223541	0 Pkt	120 Pkt	62 Pcnt	11.47 Volt	27.5 C
1762219944	0 Pkt	120 Pkt	62 Pcnt	11.99 Volt	27 C
1762216344	0 Pkt	100 Pkt	62 Pcnt	11.99 Volt	27.5 C
1762212742	0 Pkt	110 Pkt	62 Pcnt	11.99 Volt	27 C
1762209140	0 Pkt	110 Pkt	62 Pcnt	11.99 Volt	27 C
1762205542	0 Pkt	130 Pkt	62 Pcnt	11.99 Volt	27 C
1762201941	0 Pkt	110 Pkt	62 Pcnt	11.99 Volt	27 C
1762198341	0 Pkt	120 Pkt	62 Pcnt	11.99 Volt	27 C
1762194741	0 Pkt	120 Pkt	62 Pcnt	11.99 Volt	27 C
1762191141	0 Pkt	130 Pkt	62 Pcnt	11.99 Volt	27 C
1762187541	0 Pkt	190 Pkt	62 Pcnt	11.99 Volt	27.5 C
1762183941	10 Pkt	170 Pkt	62 Pcnt	11.99 Volt	27.5 C
1762180341	0 Pkt	170 Pkt	62 Pcnt	11.99 Volt	27.5 C

*Used Equation Coefficients:

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Effall: 0, 1, 0

Vin: 0, 0.074, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)